RUKO Crank Drills With Hard Metal Edges And Rod Quick In TC - Depth Of Cut 35,0 / 50,0 mm (Ø18,0mm)

- Fully ground.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.

- Fully ground.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.

- The 3-edged geometry with spiral grooves allows for extremely high stability of the Solid 3 drill bit and thus prevents the danger of edging due to excessive overloading or jamming of the chips.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.

- Fully ground.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.

- Main application Steel (N / mm²) <900, aluminum, plastics
- Secondary application Brass, bronze and cast iron
- Machines: RS10 / RS20 / RS25e / RS30e / RS40e / RS120 / RS125e / RS130e / RS140e
- Ejector: Ref. N° 108 305 (Ø 6,35 x 102,0 mm)

- Fully ground.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.

- Main application Steel (N / mm²) <900, aluminum, plastics
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)

- Main application Steel (N / mm²) <900, aluminum, plastics
- Secondary application Brass, bronze and cast iron
- Machines: RS10 / RS20 / RS25e / RS30e / RS40e / RS120 / RS125e / RS130e / RS140e
- Ejector: Ref. N° 108 305 (Ø 6,35 x 102,0 mm)

- Main application Steel (N / mm²) <900, aluminum, plastics
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)

- Fully ground.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.