- Advantages:
- Low modulus and high elasticity;
- High movement capacity (±25%), complies with ISO 11600 standards;
- Excellent adhesion on a wide variety of brackets, without the use of primer;
- Permanently elastic joints;
- High resistance to UV radiation, temperature changes and aging;
- Low odor, non-corrosive material.
- Indications:
- Joint dimensions: The width of the expansion joints must be designed according to the movement capacity of the seal. To delimit the bottom of the joint, and to avoid three-phase contact, you should use a polyethene foam cord.
- Apply the silicone with the help of a gun according to the thickness of the joint, and smooth it before forming a coating. The silicone can be cleaned with a solvent before hardens. Once it has been hardened, it can only be removed mechanically.
- In some materials, there may be adhesion problems, and for this reason, it is recommended to carry out previous tests.
- Applications:
- Recommended for sealing expansion joints between porous and non
- Ref
- CH02017037
- EAN
- 5608907432044
- Brand
- CHEMITOOL CHEMICALS
- Capacity
- 300 ML
- Base
- SILICONE NEUTRO OXIME
- Elongation at break
- 350 %
- Cartridge
- 300 ML
- Consistency
- PASTA TIXOTRÓPICA
- Density
- APROX. 0,97 G/CM3
- Shore A Hardness
- (ISO 868) 20
- Resistance to temperature
- -40°C A + 150°C
- Application temperature
- +5°C ATÉ + 40°C
- Shelf life
- 15 MESES
- Skin formation
- 4-7 MIN.
- Modulus of elasticity
- (ISO 37) 0,30 MPA
-
Safety payments
-
Worldwide shipping
-
Returns within 14 days