CHEMITOOL Tungsten cutter FLH 12X30-Ø6 C-3P
Ready to Ship
CHA23H12003006C3P
ADVANTAGES
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life. The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy. The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life. The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy. The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
Add to cart
40,00 €
and shipping is free
Datasheet \ Reference CHA23H12003006C3P | |||||
CHEMITOOL Tungsten cutter FLH 12X30-Ø6 C-3P |
|||||
DescriptionADVANTAGES |
|||||
PRODUCTS DATA
|
|||||
13 other products in the same category:
Flame-shaped burr according to ISO 7755/8 with cut conforming to DIN 8033.
tungsten-carbide-burr-h-flame-flh
FRESA TUNGS. HMB 0820/6 Z3Flame-shaped burr according to ISO 7755/8 with cut conforming to DIN 8033.
tungsten-carbide-burr-h-flame-flh
CHEMITOOL Tungsten cutter FLH 6X14-Ø6 C-3ADVANTAGES
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life. The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy. The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life. The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy. The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
tungsten-carbide-burr-h-flame-flh
FRESA TUNGS. HMB 1230/6 Z3Flame-shaped burr according to ISO 7755/8 with cut conforming to DIN 8033.
tungsten-carbide-burr-h-flame-flh
FRESA TUNGS. B 0613/3 Z5Flame-shaped burr according to ISO 7755/8 with cut conforming to DIN 8033.
tungsten-carbide-burr-h-flame-flh
FRESA TUNGS. HMB 0820/6 Z3PFlame-shaped burr according to ISO 7755/8 with cut conforming to DIN 8033.
tungsten-carbide-burr-h-flame-flh
FRESA TUNGSTENIO HMB 1230/6 Z3P SL150Flame-shaped burr according to ISO 7755/8 with cut conforming to DIN 8033.
tungsten-carbide-burr-h-flame-flh
FRESA TUNGS. HMB 1635/6 Z3PFlame-shaped burr according to ISO 7755/8 with cut conforming to DIN 8033.
tungsten-carbide-burr-h-flame-flh
FRESA TUNGSTENIO HMB 0820/6 Z3P SL150Flame-shaped burr according to ISO 7755/8 with cut conforming to DIN 8033.
tungsten-carbide-burr-h-flame-flh
FRESA TUNGS. B 0307/3 Z5Flame-shaped burr according to ISO 7755/8 with cut conforming to DIN 8033.
tungsten-carbide-burr-h-flame-flh
CHEMITOOL Tungsten cutter FLH 8X20-Ø6 C-3PADVANTAGES
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life. The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy. The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life. The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy. The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
tungsten-carbide-burr-h-flame-flh
CHEMITOOL Tungsten cutter FLH 3X8-Ø3 C-3PADVANTAGES
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life. The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy. The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life. The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy. The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
tungsten-carbide-burr-h-flame-flh
CHEMITOOL Tungsten cutter FLH 6X14-Ø6 C-3PADVANTAGES
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life. The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy. The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life. The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy. The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).