CHEMITOOL Red-Orange Fluorescent Paint Chemisol

INDICATIONSThe surface should be clean, dry and free of grease. Remove loose old lacquer, rust and sand the surface. To achieve the best fluorescent effect, apply a layer of white primer. On surfaces of plastic, first apply a layer of plastic primer before applying the white primer. After drying, sand the base layer (grain 600). The spray must be at room temperature: 5°C to 30°C. Before use, shake the spray and spray a sample. Distance to the surface to be treated is 10 to 12 centimetre. APPLICATIONS To treat treated and untreated surfaces of metal, concrete, stone, wood, glass and different types of plastic. INSTRUCTIONS Apply in several thin layers. Before applying the next layer, shake the spray again.After use, clean the valve (turn spray upside down and press the nozzle for approximately 5s). The drying time depends on the room temperature, humidity of the air and thickness of the lacquer applied. To improve the resistance to U.V. radiation and weather influences, apply a clear acrylic coat layer.