Sort by:
core-drill-hss-3-4-cbn-weldon
TERRAX by RUKO Core drills HSS with weldon shank (3/4'), cutting depth 30,0...- The 3-edged geometry with spiral grooves allows for extremely high stability of the Solid 3 drill bit and thus prevents the danger of edging due to excessive overloading or jamming of the chips.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.
acessories
CHEMITOOL CUTTING Pilot Drill Ø6,35x102mm- Fully ground.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.
profundidade-de-corte-30mm
CHEMITOOL CUTTING Ø12 PC=30MM Annular Cutter for Magnetic Drill Machine- Fully ground;
- High drilling performance;
- Available from diameter 12 to 50mm;
- Drill length 30mm (short series);
- Breakage resistance;
- Long tool life;
- 3/4″ Weldon shank;
- Material: High-speed steel M2;
- Suitable for: Steel, aluminium and non-ferrous metals;
- Compatible machine: Magnetic Column Drill Machine.
- High drilling performance;
- Available from diameter 12 to 50mm;
- Drill length 30mm (short series);
- Breakage resistance;
- Long tool life;
- 3/4″ Weldon shank;
- Material: High-speed steel M2;
- Suitable for: Steel, aluminium and non-ferrous metals;
- Compatible machine: Magnetic Column Drill Machine.
broca-craneana-cone-morse
Crank Drills With Hard Metal Edges And Thread Cone TC, Cutting Depth 50,0 mm...
broca-craneana-cone-morse
Crank Drills With Hard Metal Edges And Thread Cone TC, Cutting Depth 50,0 mm...
broca-craneana-cone-morse
Crank Drills With Hard Metal Edges And Thread Cone TC, Cutting Depth 50,0 mm...
core-drill-hss-3-4-cbn-weldon
RUKO Crown Drill Bit HSS - Depth Of Cut 30,00 mm (Ø32,00mm)- Main application Steel (N / mm²) <900, aluminum, plastics
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)
profundidade-de-corte-55mm
CHEMITOOL CUTTING Ø22 PC=55MM Annular Cutter for Magnetic Drill Machine- Fully ground.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.
core-drill-hss-3-4-cbn-weldon
RUKO Crown Drill Bit HSS - Depth Of Cut 30,00 mm (Ø29,00mm)- Main application Steel (N / mm²) <900, aluminum, plastics
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)
profundidade-de-corte-30mm
CHEMITOOL CUTTING Ø20 PC=30MM Annular Cutter for Magnetic Drill Machine- Fully ground;
- High drilling performance;
- Available from diameter 12 to 50mm;
- Drill length 30mm (short series);
- Breakage resistance;
- Long tool life;
- 3/4″ Weldon shank;
- Material: High-speed steel M2;
- Suitable for: Steel, aluminium and non-ferrous metals;
- Compatible machine: Magnetic Column Drill Machine.
- High drilling performance;
- Available from diameter 12 to 50mm;
- Drill length 30mm (short series);
- Breakage resistance;
- Long tool life;
- 3/4″ Weldon shank;
- Material: High-speed steel M2;
- Suitable for: Steel, aluminium and non-ferrous metals;
- Compatible machine: Magnetic Column Drill Machine.
profundidade-de-corte-30mm
CHEMITOOL CUTTING Ø24 PC=30MM Annular Cutter for Magnetic Drill Machine- Fully ground;
- High drilling performance;
- Available from diameter 12 to 50mm;
- Drill length 30mm (short series);
- Breakage resistance;
- Long tool life;
- 3/4″ Weldon shank;
- Material: High-speed steel M2;
- Suitable for: Steel, aluminium and non-ferrous metals;
- Compatible machine: Magnetic Column Drill Machine.
- High drilling performance;
- Available from diameter 12 to 50mm;
- Drill length 30mm (short series);
- Breakage resistance;
- Long tool life;
- 3/4″ Weldon shank;
- Material: High-speed steel M2;
- Suitable for: Steel, aluminium and non-ferrous metals;
- Compatible machine: Magnetic Column Drill Machine.
broca-craneana-cone-morse
Crank Drills With Hard Metal Edges And Thread Cone TC, Cutting Depth 50,0 mm...
profundidade-de-corte-55mm
CHEMITOOL CUTTING Ø15 PC=55MM Annular Cutter for Magnetic Drill Machine- Fully ground.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.
core-drill-hss-3-4-cbn-weldon
BROCA CRANEANA HSS 14X30MM WELDON
broca-craneana-cone-morse
Crank Drills With Hard Metal Edges And Thread Cone TC, Cutting Depth 50,0 mm...
profundidade-de-corte-30mm
CHEMITOOL CUTTING Ø26 PC=30MM Annular Cutter for Magnetic Drill Machine- Fully ground;
- High drilling performance;
- Available from diameter 12 to 50mm;
- Drill length 30mm (short series);
- Breakage resistance;
- Long tool life;
- 3/4″ Weldon shank;
- Material: High-speed steel M2;
- Suitable for: Steel, aluminium and non-ferrous metals;
- Compatible machine: Magnetic Column Drill Machine.
- High drilling performance;
- Available from diameter 12 to 50mm;
- Drill length 30mm (short series);
- Breakage resistance;
- Long tool life;
- 3/4″ Weldon shank;
- Material: High-speed steel M2;
- Suitable for: Steel, aluminium and non-ferrous metals;
- Compatible machine: Magnetic Column Drill Machine.
core-drill-hsse-co-5-cbn-quick-in
Broca Craneana HSS Cº 12mm
broca-craneana-cone-morse
Crank Drills With Hard Metal Edges And Thread Cone TC, Cutting Depth 50,0 mm...
profundidade-de-corte-30mm
CHEMITOOL CUTTING Ø22 PC=30MM Annular Cutter for Magnetic Drill Machine- Fully ground;
- High drilling performance;
- Available from diameter 12 to 50mm;
- Drill length 30mm (short series);
- Breakage resistance;
- Long tool life;
- 3/4″ Weldon shank;
- Material: High-speed steel M2;
- Suitable for: Steel, aluminium and non-ferrous metals;
- Compatible machine: Magnetic Column Drill Machine.
- High drilling performance;
- Available from diameter 12 to 50mm;
- Drill length 30mm (short series);
- Breakage resistance;
- Long tool life;
- 3/4″ Weldon shank;
- Material: High-speed steel M2;
- Suitable for: Steel, aluminium and non-ferrous metals;
- Compatible machine: Magnetic Column Drill Machine.
profundidade-de-corte-30mm
CHEMITOOL CUTTING Ø14 PC=30MM Magnetic Column Drills- Fully ground.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.
profundidade-de-corte-55mm
CHEMITOOL CUTTING Ø20 PC=55MM Annular Cutter for Magnetic Drill Machine- Fully ground.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.