ADVANTAGES - Optimum quality/value ratio; - Tungsten carbide head; - 2 cutters; - Excellent drilling performance; - Available from diameter 4,0 to 10mm; - Long tool life.
The C2 POWER CHEMITOOL drill is prepared for drilling in concrete, masonry, stone and brick. The drill spiral shaped has as main feature, the dust extraction capacity, making drilling faster, thus reducing the wear of the drill body.
The excellent quality of the drill tip with two cutters, makes that it is not necessary much pressure to make the hole.
This type of drill must be used with drills with active percussion mode.
ADVANTAGES - Optimum quality/value ratio; - Tungsten carbide head; - 4 cutters; - Excellent drilling performance; - Available from diameter 5,0 to 10mm; - Long tool life.
The CX4 PERFORMANCE CHEMITOOL drill bit with SDS-PLUS(1) shank is prepared for drilling in concrete, masonry, stone and brick. The spiral shaped drill bit has as main feature, the dust extraction capacity, making drilling faster, thus reducing the wear of the drill body.
The excellent quality of the four-cutting bit tip means that it does not require a lot of pressure to make the hole.
This type of drill must be used with light hammers, with SDS-Plus compatible sockets.
ADVANTAGES - Optimum quality/value ratio; - Tungsten carbide head; - 2 cutters; - Excellent drilling performance; - Available from diameter 4,0 to 10mm; - Long tool life.
The C2 POWER CHEMITOOL drill is prepared for drilling in concrete, masonry, stone and brick. The drill spiral shaped has as main feature, the dust extraction capacity, making drilling faster, thus reducing the wear of the drill body.
The excellent quality of the drill tip with two cutters, makes that it is not necessary much pressure to make the hole.
This type of drill must be used with drills with active percussion mode.
- Includes: 4 mm / 5 mm / 6 mm / 8 mm / 10 mm; - Best carbide tip design; - Aggressive head design; - Exclusive welding process; - Unique groove design.
- Includes: 4 mm / 5 mm / 6 mm / 7 mm / 8 mm / 10 mm / 12 mm; - Best carbide tip design; - Aggressive head design; - Exclusive welding process; - Unique groove design.
Includes: 5 mm / 6 mm / 8 mm / 10 mm / 12 mm x 160 mm.Speed. Set the pace with Speedhammer ™ Plus. With 28% greater flute capacity, the innovative design goes direct and direct. It removes dust and debris very quickly. E is particularly effective on uncured concrete due to unobstructed performance
