INDICATIONS The surface should be clean, dry and degreased.Remove old and loose varnish, rust and sand the surface. Do not apply any primer. The spray must be at room temperature. The best temperature of use is between 15°C and 25°C. Before use, shake the spray can for 2 min. and spray a sample. Distance to the surface to be treated should be approximately 25 to 30 cm. APPLICATIONS Recommended for treated and untreated surfaces exposed to high temperatures. INSTRUCTIONSApply in several thin layers and wait at least 5 min. between each layer. Before applying the next layer, shake the spray can again. Let it dry at room temperature for one hour. Then heat for 30 to 60 minutes (160°C) in order to harden the paint coat. Smoke develops during the paint hardening process. After use, clean the valve (turn the can upside down and press the nozzle for approximately 5 seconds until only gas comes out). The drying time depends on the room temperature, air humidity and thickness of the product applied.
- Ref
- CHC060203
- EAN
- 5604630051408
- Brand
- CHEMITOOL CHEMICALS
- Color
- ANTHRACITE
- Capacity
- 400 ML
- Base
- RESINA DE SILICONE
Silicone resin
- Base
- RESINA DE SILICONE
Silicone resin
- Resistance to temperature
- < 800°C
- Shelf life
- 10 ANOS
10 years
- Shelf life
- 10 ANOS
10 years
- Drying
- DEPOIS DE 10 A 20 MINUTOS
- Solids
- APROX. 16% W/W
- Drying time
- > 10 A 20 MIN
- Solid content
- APROX. 12% W/W
- Coverage
- 1,25 A 1,75 M2
- Brightness
- High brightness at an angle of
MATE ACETINADO
- Brightness
- High brightness at an angle of
MATE ACETINADO
- Touch Drying
- APÓS 10 A 15 MINUTOS
- EU-VOC solvent percentage
- APROX. 88% W/W
- Touch
- > 10 a 15 min
- Hardening
- DEPOIS DE 30 A 60 MIN. (160°C)
-
Safety payments
-
Worldwide shipping
-
Returns within 14 days
