Datasheet \ Reference FZ712140 | |||||
FORZA ISO 40 Cone for CAF2 |
|||||
Description |
|||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
home
MILWAUKEE Metal Drill Bits HSS Rollforged - DIN 338 HSSR 10.5 x 133 - 5 pcs- Genuine MILWAUKEE accessories;
- High speed steel rollforged metal drill bits produced according to DIN 338;
- Oxide coating enables quick swarf removal. Normal point shaped cutting tip with 118° angle;
- Type N flute normal angle;
- Suitable for drilling in steel, cast iron, alloyed and non-alloyed material up to 800 N/mm².
- High speed steel rollforged metal drill bits produced according to DIN 338;
- Oxide coating enables quick swarf removal. Normal point shaped cutting tip with 118° angle;
- Type N flute normal angle;
- Suitable for drilling in steel, cast iron, alloyed and non-alloyed material up to 800 N/mm².
home
PFERD Wheel Brushes, Crimped, Slim - SiliCon Carbide (SiC ) Plastic Filament...- Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces.
home
KING TONY 8 (un.) Open End Wrench Set 1108SR-A spanner set is used for assembling and disassembling threaded connections.
home
KING TONY DR. 8 PC Deep Impact Socket Set 1' DR.-Material - chrome molybdenum steel alloy.
-Finish - phosphated.
-Finish - phosphated.
home
STAHLWILLE Hexagon Key Wrench 7/16'DIN ISO 2936 (metric), for socket head screws, Chrome Vanadium, nickel-plated (sizes 0.7; 0.9; 1.3 mm, gunmetal finish).
home
ANi Male-Female Threaded Elbow Fitting 1/2 M 1/2 F- Conical male thread ISO 7 (BSPT)- DIN 2999- BS 21.
home
MILWAUKEE Big Hawg Hole Cutter 54mm- Genuine Milwaukee accessories;
- Suitability: softwoods, chipboard, medium density fibreboard (MDF), OSB board.
- Suitability: softwoods, chipboard, medium density fibreboard (MDF), OSB board.
home
STAHLWILLE 1/2' IMPACT Socket Extra Deep with Reduced Outside Diameter 19 mm1/2 Inside Square-drive, ISO 1711-2, for power drivers, extra deep with reduced outside diameter, Chrome Alloy Steel, gunmetal finish.
home
STAHLWILLE Socket 3/8' nº 456 21 mmDIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3709 (test loads), HPQ® high performance steel, chrome plated.
home
KING TONY 25~250 in. lb. Adjustable Torque Wrench 34223-1B-2 way ratchet head, 15° lifting angle (24 teeth).
-Lifting angle of 15°.
-Lifting angle of 15°.