PFERD Abrasive Spiral Bands Zirconia Alumina Z-COOL G80 30 x 30 mm
Ready to Ship
4007220148242
- For coarse grinding work with a high stock removal rate and cool grinding.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Zirconia alumina Z-COOL.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Zirconia alumina Z-COOL.
Add to cart
40,00 €
and shipping is free
Datasheet \ Reference 4007220148242 | |||||||||
PFERD Abrasive Spiral Bands Zirconia Alumina Z-COOL G80 30 x 30 mm |
|||||||||
Description- For coarse grinding work with a high stock removal rate and cool grinding. |
|||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
16 other products in the same category:
CHEMITOOL Zirconia Alumina Z Flap Disc was developed for professional use in steel and stainless steel ensuring high stability during use and a long tool life.
aco-38-hrc-desbaste-de-bordo
MO MONTADA ZY2006 3AR 80 O 5Vbi-metal-hss-hole-saw
SERRA CRAN. LS 40 40MM 1.9/16mo-ceramica-aco-dureza-50-hrc-cinza
CHEMITOOL CUTTING Grey-Coloured Ceramic Grinding Wheel Ø300X25- Excellent sharpening ability.
- Fast grinding.
- Long tool life.
- Grey (Universal use).
- Fast grinding.
- Long tool life.
- Grey (Universal use).
carbide-cutting-straight-shank-drill
DeWalt Mansory Drill Bit 10x120mm- Rotary/percussion masonry drill bit 130° Douglas form carbide tip.
- Shank diameter of drill bits 10-13 mm is reduced to 9.5 mm.
- Shank diameter of drill bits larger than 13 mm is reduced to 12.7 mm.
- Shank diameter of drill bits 10-13 mm is reduced to 9.5 mm.
- Shank diameter of drill bits larger than 13 mm is reduced to 12.7 mm.
cutting-tools
PFERD Abrasive Bands Aluminium Oxide A Cylindrical G60 19 x 25 mm- For universal applications from coarse to fine grinding.
- Abrasive: Aluminium oxide A.
- Abrasive: Aluminium oxide A.
lamela-de-perno-em-feltro-superficies
LAMELA PERNO FLS 8050/6 DURAMounted felt flap wheels are used for pre-polishing and high-gloss polishing on small to mediumsized components.
caconete-redondo-din-en-22568-esquerda
CAÇONETE ROSCA ESQUERDA M4X0.7mmtwist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 type VA, HSSE-Co 5 Ground(Ø 7,5 mm)- Powerful right-hand cutting high-performance drill with distinctive heat resistance.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.
broca-sds-max-2c-standard
DeWalt High Performance SDS-Plus Drill Bit 25x450mm-The innovative SDS-Plus drills are among the best in terms of speed, durability and strength.
disco-de-fibra-para-metal
BELFLEX Corundum Abrasive Fibre Back Disc A-80 125 x 0,8 x 22 mm- Discs with fibre back and Corundum grain by mean of the electro-coated field, suitable for sanding and polishing;
- Use: With angle grinders fixing the discs on a flexible rubber pad;
- Packaging: Boxes of 100 pcs in 4 retractable film of 25 pcs/each.
- Use: With angle grinders fixing the discs on a flexible rubber pad;
- Packaging: Boxes of 100 pcs in 4 retractable film of 25 pcs/each.
tungsten-carbide-burr-m-cone-skm
CHEMITOOL Tungsten cutter SKM 6X13-Ø3 C-3PADVANTAGES
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life.
The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy.
The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life.
The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy.
The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
conjuntos-de-brocas-para-betao
IRWIN Kit 5 Bits Masonry- Includes: 4 mm / 5 mm / 6 mm / 8 mm / 10 mm;
- Best carbide tip design;
- Aggressive head design;
- Exclusive welding process;
- Unique groove design.
- Best carbide tip design;
- Aggressive head design;
- Exclusive welding process;
- Unique groove design.
lamina-de-serra-para-madeira
DeWalt HCS Cutting blade for wood cuts (152mm x 4mm)- DEWALT HCS jigsaw blades are engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics
- Made from High Carbon Steel
- Made from High Carbon Steel
lamela-de-perno-para-acabamento-misto
PFERD Polinox Mounted Grinding Wheels PNZ Aluminium Oxide A G100 40 x 20 mm- The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers.
- This flap structure facilitates improved stock removal and achieves a coarser surface finish.
- Abrasive: Aluminium oxide A.
- This flap structure facilitates improved stock removal and achieves a coarser surface finish.
- Abrasive: Aluminium oxide A.
fita-de-serra-para-metal
LENOX Saw Classic Tape 2480X19X0,9 Z6/10- Aluminum / non-ferrous applications;
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.