PFERD Abrasive Spiral Bands Zirconia Alumina Z-COOL G80 45 x 30 mm
Ready to Ship
4007220148440
- For coarse grinding work with a high stock removal rate and cool grinding.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Zirconia alumina Z-COOL.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Zirconia alumina Z-COOL.
Add to cart
40,00 €
and shipping is free
Datasheet \ Reference 4007220148440 | |||||||||
PFERD Abrasive Spiral Bands Zirconia Alumina Z-COOL G80 45 x 30 mm |
|||||||||
Description- For coarse grinding work with a high stock removal rate and cool grinding. |
|||||||||
PRODUCT DATA
|
|||||||||
SPECIFICATIONS
|
16 other products in the same category:
broca-de-chanfrar-curta-90-fino
Broca acabamento fino M8 90ºtwist-drill-din-1897-n-hss-g
RUKO Espiral Bits DIN 1897 Tipo N, HSSE-Co5 - Short (Ø 7,00mm)- Main use Steel (N / mm ²) <900, Steel (N / mm ²) <1100 and stainless steel
- Secondary use Titanium aliedo
- Secondary use Titanium aliedo
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Type N, HSS-G Flat (Ø 17,50mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
abrasive-discs
PFERD Cut-Off Wheel SG ALU Flat Type SGP STEELOX EHT 125-2,2 A46- Cut-off wheel for steel and stainless steel (INOX) with high cutting performance and an excellent tool life. Specially optimised for use on thin sheets and profiles.
- Excellent tool life on thin sheet metal and profiles thanks to wear-resistant bond system.
- Universally suitable for steel and stainless steel (INOX).
- Fast work progress thanks to high cutting performance.
- Excellent tool life on thin sheet metal and profiles thanks to wear-resistant bond system.
- Universally suitable for steel and stainless steel (INOX).
- Fast work progress thanks to high cutting performance.
lamela-de-perno-para-metal
CHEMITOOL Alu-oxide shaft mounted flap wheel Ø 40x20x6|6×30 mm A320CHEMITOOL Aluminum Oxide A Shaft Mounted Flap Wheel is for universal applications from coarse to fine grinding. Enable to remove material in spaces of difficult access.
twist-drill-din-338-n-hss-g
RUKO Twist Drill 20mm DIN 338 type N, HSS RolledHigh-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity. Thanks to the split point, this drill has good centring properties and requires little pressure.
suportes-para-limas-de-metal-duri
LIMA HMFH 51 Rfita-de-serra-para-metal
LENOX Saw Classic Tape 3350X27X0,9 Z5/8- Aluminum / non-ferrous applications;
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.
lamela-de-perno-para-metais-extra-duros
LAMELA F 8030 6MM C 80tungsten-carbide-burr-l-round-cone-kel
CHEMITOOL Tungsten cutter KEL 12X25-Ø6 C-3PADVANTAGES
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life. The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy. The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life. The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy. The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).
caconete-redondo-din-en-22568-esquerda
CAÇONETE ROSCA ESQUERDA M4X0.7mmsds-plus-hammer-drill-2-cutters
IRWIN Construction Bit SPEEDHAMMER PLUS IRWIN Ø22x460 mmSpeed. Set the pace with Speedhammer ™ Plus. With 28% greater flute capacity, the innovative design goes direct and direct. It removes dust and debris very quickly. E is particularly effective on uncured concrete due to unobstructed performance
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Type N, HSS-G Dark (Ø 10,60mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics