KING TONY Universal Joint with Ball 2-3/8' 61mm
Ready to Ship
KT479AP
- Universal joint with ball;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
Buy more
40,00 €
and shipping is free
Datasheet \ Reference KT479AP | |||||||
KING TONY Universal Joint with Ball 2-3/8' 61mm |
|||||||
Description- Universal joint with ball; |
|||||||
PRODUCT DATA
|
|||||||
SPECIFICATIONS
|
16 other products in the same category:
home
KING TONY 3/8' IPR20 RESISTORX® Plus Bit Socket- For torx plus tamper screw;
- IPR20 for the operation of the screwed connection of the plug-in pump on MERCEDESBENZ Atego and Actros MAZDA 3 1.4 and 1.6;
- IPR25 for the screwed connections at the control unit and the air flow sensor on VW;
- DIN 3120.
- IPR20 for the operation of the screwed connection of the plug-in pump on MERCEDESBENZ Atego and Actros MAZDA 3 1.4 and 1.6;
- IPR25 for the screwed connections at the control unit and the air flow sensor on VW;
- DIN 3120.
home
STAHLWILLE 1/4' QR Ratchet, Fine Tooth nº 415QRL NLong, reversible, 80 teeth, with QuickRelease safety lock and 2-component handle, for use in confined spaces, re-engages after movement of 4.5°, construction without screws prevents foreign object damage, DIN 3122/ISO 3315, registered design.
home
INDASA P500 230x280 Rhynalox Plus Line Sheet- High performance abrasive for dry sanding and fine finishing.
home
MILWAUKEE Metal Drill Bits HSS Rollforged - DIN 338 HSSR 4.0 x 75 - 10 pcs- Genuine MILWAUKEE accessories;
- High speed steel rollforged metal drill bits produced according to DIN 338;
- Oxide coating enables quick swarf removal. Normal point shaped cutting tip with 118° angle;
- Type N flute normal angle;
- Suitable for drilling in steel, cast iron, alloyed and non-alloyed material up to 800 N/mm².
- High speed steel rollforged metal drill bits produced according to DIN 338;
- Oxide coating enables quick swarf removal. Normal point shaped cutting tip with 118° angle;
- Type N flute normal angle;
- Suitable for drilling in steel, cast iron, alloyed and non-alloyed material up to 800 N/mm².
home
IRWIN Bit for Metal TURBOMAX HSS Ø9,5x125 mmDesigned for high performance Biting. TURBOMAX ™ Bits are designed for high performance Biting for all types of woods and plastics.Suitable for stainless steel, although the HSS Cobalt series is specifically designed for it. Stainless steel should always be usedwith refrigerant.