PFERD Polifan Flap Discs Performance Line A-COOL SG Inox + Alu Flat Type PFF 125 A 60 SG-COOL/22,23
Ready to Ship
4007220232934
- POLIFAN flap disc with particularly cool grinding on materials with poor thermal conduction such as stainless steel (INOX) and aluminium.
- Materials that can be worked: stainless steel (INOX), aluminium, other nonferrous metals.
- Applications: surface grinding, weld dressing, chamfering, deburring.
- Abrasive: Aluminium oxide A with active grinding, cooling coating (COOL).
- Materials that can be worked: stainless steel (INOX), aluminium, other nonferrous metals.
- Applications: surface grinding, weld dressing, chamfering, deburring.
- Abrasive: Aluminium oxide A with active grinding, cooling coating (COOL).
Buy more
40,00 €
and shipping is free
Datasheet \ Reference 4007220232934 | |||||||||||
PFERD Polifan Flap Discs Performance Line A-COOL SG Inox + Alu Flat Type PFF 125 A 60 SG-COOL/22,23 |
|||||||||||
Description- POLIFAN flap disc with particularly cool grinding on materials with poor thermal conduction such as stainless steel (INOX) and aluminium. |
|||||||||||
PRODUCTS DATA
|
|||||||||||
SPECIFICATIONS
|
16 other products in the same category:
home
ANi Male-Female Reducing Nipple 33/R12 3/8 M 1/2 F- Cylindrical Thread- ISO 228 (BSPP);
- Nickel-plated brass (UNI EN 12165 CW 617N).
- Nickel-plated brass (UNI EN 12165 CW 617N).
home
CHEMITOOL BY PAYPER Polo ROME Short Sleeve 180Gr Grey XXL- 100% cotton.
- Short sleeves.
- Side openings.
- Short sleeves.
- Side openings.
home
PFERD Polifan Flap Discs Special Line Steel/Inox Type SGP Zirkon-Corner PFC...- Special tool with high stock removal rates for grinding work on fillet welds and angles which are hard to reach.
- Abrasive: Zirconia alumina Z.
- Grit size: 40.
- Materials to be worked: Steel, stainless steel (INOX).
- Applications: Work on fillet welds and angles.
- Abrasive: Zirconia alumina Z.
- Grit size: 40.
- Materials to be worked: Steel, stainless steel (INOX).
- Applications: Work on fillet welds and angles.
home
LORCH MIG-MAG Standard Torche- Water-cooled 4 m MW 5500-Large control key for connection and disconnection Suitable for 2 and 4 time operation
home
IRWIN Carbon Steel Snap-Off Blade 18 mm (5 un.)-Irwin Snap-Off blades are made from carbon steel and are supplied in a pack of 5.
home
STAHLWILLE Electronics Side Cutter with Slim Tapered Head, Suitable for...DIN ISO 9654, slim tapered head for use in confined spaces, box joint for precise movement, precision cutting edges, no bevel suitable for flush cutting of soft and medium hard wire, Cu- and diode wires, welded on double leaf spring, alloy steel of highest quality, induction hardened cutting edges, approx. 63 HRC.
home
STARRETT 150mm- 6 3753A Electronic Depth Gage without Output- Made of stainless steel.
- Absolute zero (maintains the initial zero).
- Automatic switch-off after 5 minutes of non-use.
- Engraved serial number for calibration and traceability purposes.
- Battery 3V CR2032.
- No output for peripherals.
- Absolute zero (maintains the initial zero).
- Automatic switch-off after 5 minutes of non-use.
- Engraved serial number for calibration and traceability purposes.
- Battery 3V CR2032.
- No output for peripherals.
home
STAHLWILLE 3/4' IMPACT Socket 22 mm3/4 Inside Square-drive, DIN 3129/ISO 1711-2, for power drivers, Chrome Alloy Steel, gunmetal finish.
home
STAHLWILLE nº 21 Double Ended Ring Spanner 19x22 mmStahlwilleSTABIL® offset, DIN 838/ISO 10104 (metric sizes), Chrome Alloy Steel,
chrome plated.
chrome plated.