RUKO Set Of Tungsten Carbide Rotary Burrs TiCN in Steel Case

home

INDASA P40 38x50 Rhynometal Roll

- Resistant screen with aluminium oxide, an efficient combination.

Available

home

MACHO MAQ.ESPIRAL HSS*6X1,0

Available

pregos-pinos-e-agrafos

DeWalt XH Extra hard nails 3.0mm x 22mm

-
High Density (HD) nails for high sheer load applications
- Collated in strips of 15 for rapid, repeated nailing
- Zinc coating for indoor & outdoor use

Available

medidor-de-nivel-sonoro-digital

BELFLEX Digital Sound Level Meter UT352

- Digital sound level meter (sound level meter);
- Measuring level of 30 - 130 dB;
- Analog graphic bar;
- Data retention and registration (63);
- Backlit display. Auto power off after 15
minutes of inactivity;
- Standby mode and low battery warning;
- Maximum and minimum mode;
- Max.display 1999;
- According to standards EN61326: 1997 + A1: 1998 + A2: 2001 + A3: 2003, EN61672-1: 2002 class 2 and IEC60641: 1979 Type 2. ANSI S1.4: 1983 Type 2.

Available

home

Nozzle holder with nozzle 055 for

Available

din-933-parafuso-sextavado-rosca-total

CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M16X100 8.8...

- Hexagon Head Bolt Screw Full Thread Plain;
- DIN 933;
- Material: 8.8;
- Finishing: Plain.

Available

home

JOGO 10 CHAVES LUNETA INCLINADA MM

Available

twist-drill-din-338-n-hss-g

RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 6,30mm)

- Main application Steel (N / mm²) <900 and cast iron

- Secondary application Brass and bronze

Available

home

Support For Tungsten Electrodes CHEMITOOL Ø2,4mm

Available

din-933-parafuso-sextavado-rosca-total

CHEMITOOL FASTENERS Total Thread Hexagon Head Screw DIN 933 M24X70 8.8...

- Hexagon Head Bolt Screw Full Thread Plain;
- DIN 933;
- Material: 8.8;
- Finishing: Plain.

Available

home

CHEMITOOL BY PAYPER Polo ROME Short Sleeve 180Gr Grey XL

- 100% cotton.
- Short sleeves.
- Side openings.

Available

sds-max-concrete-hammer-drill-4-cutters

CHEMITOOL CUTTING Ø32,0X920MM SDS-MAX Hammer Drill Bit - CX4 Performance

- Optimum quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 12,0 to 52mm diameter;
- Long tool life;
- Head: 4 cutters tungsten carbide;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Heavy electro-pneumatic hammer.

Available

home

PFERD Combidisc Abrasive Discs Diamond CDR G126 25 mm

- Exceptionally suitable for work on wear- resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
- Abrasive: Diamond.

Available

twist-drill-din-338-n-hss-g

TERRAX by RUKO Twist Drills DIN 338 type VA, HSSE-Co 5 Ground(Ø 11,5 mm)

- Powerful right-hand cutting high-performance drill with distinctive heat resistance.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.

Available

home

16/A 6X14 LIGAÇÃO RÁPIDA

Available