EXTRATOR INTERIORES 38-46MM

- They are especially suitable for work on fillet welds and very hard-to-reach slots or indentations.
- Abrasive: Aluminium oxide A.

-Set includes 41 mm and 46 mm tension adjustment key.

Suitable for universal work on surfaces such as metal tubular structures, e.g. removal of rough grinding traces, removal of oxidation and light deburring work.
- Achieve matt and satin-finished surfaces.
- Abrasive: Aluminium oxide A

For ratchet/torque wrench No 721/5, 721/5 Quick: 1 pinion, 1 pawl, 1 switch-over button and pin, 1 ball, 2 compression springs, 2 screws.

For chisel and Biting work on brick, concrete and loose stone (eg for laying cables).

- Spiral carbon steel drill for wood ø 14 x 200mm.

- Used to cover a side end where an intermediate fill-in strip cannot be used to close an intermediate space.

Designed for high performance Biting. TURBOMAX ™ Bits are designed for high performance Biting for all types of woods and plastics.Suitable for stainless steel, although the HSS Cobalt series is specifically designed for it. Stainless steel should always be usedwith refrigerant.

- Mesh sanding sheets last at least four times longer than traditional DeWalt sandpaper sheets.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.