Datasheet \ Reference STA32032 | |||||||
5 Discos ø 125 mm. |
|||||||
Description |
|||||||
PRODUCTS DATA
|
|||||||
16 other products in the same category:
home
PFERD Coated Abrasives Short Belts Aluminium Oxide A G120 20 x 520 mmFor universal applications from coarse to fine grinding.
- Abrasive: Aluminium oxide A
- Abrasive: Aluminium oxide A
home
ANi Sleeve For Rubber Hose Connectors 10/M 1/4 F ø 16 mm- Cylindrical female thread- ISO 228 (BSPP);
- Nickel-plated brass (UNI EN 12164 CW 614N).
- Nickel-plated brass (UNI EN 12164 CW 614N).
home
KING TONY 3/4' 6 Points Metric Deep Impact Socket 3/4' 19mm- Intern 6 points metric deep impact socket;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
home
BLACK+DECKER 18V SDS-Plus Hammer with Two 2.5Ah Batteries and Case- As part of the POWERCONNECT ™ 18V interchangeable battery system, this SDS-Plus 18V Hammer provides long-lasting power without the hassle of a cable.
- Allows you to quickly switch between the three modes (drilling, percussion and chiselling) to suit the desired application.
- Its 1.2J engine provides high impact power that makes even the most demanding tasks easier.
- Allows you to quickly switch between the three modes (drilling, percussion and chiselling) to suit the desired application.
- Its 1.2J engine provides high impact power that makes even the most demanding tasks easier.
home
LENOX Gold Reciprocating Extreme Metal Cutting Saw Blades 152X25X1.07 14TPI -...- Longest lasting blade ever.
home
KING TONY PHILLIPS® PH2 150mm Reversible Blade 1300P- 1/4 PHILLIPS® reversible blade - long head type;
- DIN ISO 2351-2;
- Silicon chrome vanadium alloy steel (S2);
- Nickel plated;
- Magnetic.
- DIN ISO 2351-2;
- Silicon chrome vanadium alloy steel (S2);
- Nickel plated;
- Magnetic.
home
KING TONY 3/8' H7 Impact Bit Socket- For hexagon head screw;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
home
PFERD Rubber Drum Holders Cylindrical GK 3030/6 H- The sanding belts marked with H have greater hardness, thus allowing thinning with higher contact pressure.
- These sandpaper holders have a smaller elasticity and are therefore more suitable for sanding corners and edges.
- Special H sandpaper holder: Hardness approx. 80 Shore A.
- These sandpaper holders have a smaller elasticity and are therefore more suitable for sanding corners and edges.
- Special H sandpaper holder: Hardness approx. 80 Shore A.
home
CHEMITOOL BY PAYPER T-Shirt 140/150GR Print Cinza M- 100% cotton.
- Round neck.
- Short sleeves.
- Round neck.
- Short sleeves.