CHEMITOOL Dust Removal Spring
Ready to Ship
CHT10070211240WD09
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference CHT10070211240WD09 | |||||
CHEMITOOL Dust Removal Spring |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
broca-multi-material-convencional
DeWalt Multi-Material Drill Bit 10x134x104mm- Faster Drilling.
- Can be used in wood, masonry and metal.
- Alows drilling near to corners and edges.
- Can be used in wood, masonry and metal.
- Alows drilling near to corners and edges.
pneumatics
PINÇA 2,34 MM
home
KRAFFT 5l 60-CP Screw Compressor OilCylinder and crankcase lubrication in both rotary and reciprocating or screw compressors, air or inert gases, single or multiple stages, working even under very severe operating conditions. Due to its high performance and special formulation, it is ideal for use in all those hydraulic circuits that require an oil with low ash content.
safety-hard-hats
CHEMITOOL SAFETY Blue Anti-Shock Cap- ABS inner shell covered with EVA foam.
- Velcro fastening.
- Ventilated for better breathability.
- Pala with 7cm.
- Available in 2 colours: black and blue.
- EN812.
- Velcro fastening.
- Ventilated for better breathability.
- Pala with 7cm.
- Available in 2 colours: black and blue.
- EN812.
home
KING TONY 1250 H.W g Lump Hammer-High quality alloy steel.
-Forged and tempered.
-Wood and metal wedge.
-Forged and tempered.
-Wood and metal wedge.
iso-7380-parafuso-cabeca-oval
CHEMITOOL Hexagon Sockted Button Head Screw ISO 7380 M6X12 10.9 Without...- Hexagon sockted button head screw without finishing;
- Material: Carbon steel;
- DIN 7991;
- Class 10.9.
- Material: Carbon steel;
- DIN 7991;
- Class 10.9.
profundidade-de-corte-55mm
CHEMITOOL CUTTING Ø26 PC=55MM Magnetic Column Drills- Fully ground.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.
twist-drill-din-338-n-hss-g
BROCA CIL.HSS DIN338 3,3mm
home
KING TONY 3/4'F x 1'M Reducer Adapter for Impact Sockets-Material - chrome molybdenum steel alloy.
-Finishing - sunk phosphate.
-Adapter DR. of 3/4 and with sphere.
-Finishing - sunk phosphate.
-Adapter DR. of 3/4 and with sphere.
chaves-de-caixa-e-acessorios-1-2
KING TONY 1/2' 6mm 6 Points Standard Metric Socket- DIN 3124, ISO 2725-1;
- Chrome vanadium alloy steel;
- Polished, chrome plated;
- 4 ball retaining grooves.
- Chrome vanadium alloy steel;
- Polished, chrome plated;
- 4 ball retaining grooves.
home
MILWAUKEE HSS-G Metal Drill Bits - Short - DIN 1897 HSSGS 3 x 46 - 10 pcs- Genuine MILWAUKEE accessories;
- Drill bit quality: High quality high speed steel;
- Tip geometry: Split Point DIN 1412 C;
- Point angle: 135°. Tolerance: h8;
- Flute / Helix angle: Type N flute and normal 20 - 30° angle;
- Right hand cutting edge. Surface / Colour: Polished silver;
- Withstands high drill point pressure due to short overall length;
- Excellent concentricity. Polished type N flute with right hand cutting edge, eliminates binding for faster chip removal and faster cutting with less effort;
- Application: Most suited for drilling sheet and thin walled materials;
- Suitable for drilling in sheet steel, thin alloyed and non-alloyed material up to 900 N/mm²;
- Also suitable for wood and plastics.
- Drill bit quality: High quality high speed steel;
- Tip geometry: Split Point DIN 1412 C;
- Point angle: 135°. Tolerance: h8;
- Flute / Helix angle: Type N flute and normal 20 - 30° angle;
- Right hand cutting edge. Surface / Colour: Polished silver;
- Withstands high drill point pressure due to short overall length;
- Excellent concentricity. Polished type N flute with right hand cutting edge, eliminates binding for faster chip removal and faster cutting with less effort;
- Application: Most suited for drilling sheet and thin walled materials;
- Suitable for drilling in sheet steel, thin alloyed and non-alloyed material up to 900 N/mm²;
- Also suitable for wood and plastics.
standard-bottle-jacks
MEGA Hydraulic Bottle Jack - Br Line 5t- Zinc-plated telescopic lever;
- It is possible to use vertical and horizontal;
- Rotary lever accessible in any position.
- It is possible to use vertical and horizontal;
- Rotary lever accessible in any position.
