SUBC.CX DE ESCOVA
Ready to Ship
ABDN450097
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference ABDN450097 | |||||
SUBC.CX DE ESCOVA |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
home
CHEMITOOL TOOLS Aluminum Stepladder Pro 8 Steps- Easy to transport and store.
- Anti-slip top in treated steel with locking system.
- Equipped with tray and tool holder.
- Anti-slip top in treated steel with locking system.
- Equipped with tray and tool holder.
din-7505a-parafuso-cabeca-embeber
CHEMITOOL FASTENERS Flat Head Screw Pozidrive for Particle Board 4X50 4.8 DIN...
din-928-porca-de-soldar-quadrada
CHEMITOOL Square Weld Nut DIN 928 M10 8 Without Finishing
home
IRWIN Diamond Bit Ø7 mm- Water drilling increases service life of the tool;
- Do not put too much pressure on the tool, let it work;
- Tilt gently to allow fragments released out;
- Cutting speed: 2700 RPM;
- No percussion.
- Do not put too much pressure on the tool, let it work;
- Tilt gently to allow fragments released out;
- Cutting speed: 2700 RPM;
- No percussion.
twist-drill-din-338-n-hss-g
RUKO Spiral Bits Disassembly DIN 338 Type N, HSS-R (Ø 20,00mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Brass and Bronze
- Secondary use Brass and Bronze
home
STAHLWILLE 3/4' IMPACT Socket Extra Deep with Reduced Outside Diameter 33 mm3/4 Inside Square-drive, ISO 1711-2, for power drivers, extra deep with reduced outside diameter, Chrome Alloy Steel, gunmetal finish.
home
KING TONY TORX® T40 80mm Bit- TORX® Bit;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, sand-blasted.
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, sand-blasted.
home
KING TONY 3/4' 6 Points Impact Bit Socket H32 54.5mm- Impact bit socket hexagon head;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
home
PFERD Wheel Brushes, Crimped, Slim, Stationary - SiliCon Carbide Plastic...- Its plastic filament makes this product particularly suitable for deburring complicated components
such as cylinder heads or gear toothing.
- Ideal for processing aluminium due to the longer trim length and higher degree of flexibility.
- Suitable for use on stationary machines, automated centres
and robots.
such as cylinder heads or gear toothing.
- Ideal for processing aluminium due to the longer trim length and higher degree of flexibility.
- Suitable for use on stationary machines, automated centres
and robots.
din-936-porca-sextavada
CHEMITOOL Hexagon Thin Nut DIN 936 M8 A2 Passivated Stainless Steel
conjuntos-de-brocas-para-betao
CHEMITOOL CX4 Performance 5p Drill Bit SetADVANTAGES
- Optimum quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from diameter 5,0 to 10mm;
- Long tool life.
The CX4 PERFORMANCE CHEMITOOL drill bit with SDS-PLUS(1) shank is prepared for drilling in concrete, masonry, stone and brick.
The spiral shaped drill bit has as main feature, the dust extraction capacity, making drilling faster, thus reducing the wear of the drill body.
The excellent quality of the four-cutting bit tip means that it does not require a lot of pressure to make the hole.
This type of drill must be used with light hammers, with SDS-Plus compatible sockets.
- Optimum quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from diameter 5,0 to 10mm;
- Long tool life.
The CX4 PERFORMANCE CHEMITOOL drill bit with SDS-PLUS(1) shank is prepared for drilling in concrete, masonry, stone and brick.
The spiral shaped drill bit has as main feature, the dust extraction capacity, making drilling faster, thus reducing the wear of the drill body.
The excellent quality of the four-cutting bit tip means that it does not require a lot of pressure to make the hole.
This type of drill must be used with light hammers, with SDS-Plus compatible sockets.
ponta-de-feltro-forma-arvore-spk
MO FELTRO FK SPK 1018/3The conical pointed shape SPK is mainly used for work on radii and contours