KRANZLE 500mm Lance with Fan Jet Nozzle
Without stock
KR12435-M2003
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference KR12435-M2003 | |||||
KRANZLE 500mm Lance with Fan Jet Nozzle |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
tungsten-carbide-burr-j-cone-60-ksj
FRESA TUNGS. KSJ 1613/6 Z3Conical counterbore burr according to DIN 8032 with cut conforming to DIN 8033, with point
angle (60°);
-The KSJ 0605/6 (double-ended) type is cut and usable on both sides.
angle (60°);
-The KSJ 0605/6 (double-ended) type is cut and usable on both sides.
hand-tap-mf-din-2181-hss
CHEMITOOL CUTTING Hand Taps Set Metric Fine M14 - DIN2181- Great quality/value ratio;
- Easy to use;
- 2-piece game;
- Fully rectified;
- Resistant to breakage;
- Thread: M14.
- Easy to use;
- 2-piece game;
- Fully rectified;
- Resistant to breakage;
- Thread: M14.
resina-quimica-base-vinilester
DeWALT 410ML AC100-PRO Chemical Resin- FOR BETON:
- Approved by ETAG 001 (ETA Option 1) for use on cracked concrete.
- FOR MASONRY:
- ETAG 029 approved for use in solid and hollow brick.
- FOR RETROFITTED REINFORCING BEAMS:
- ETA approval and German national approval.
- FOR SEISMIC LOADING:
- Seismic load approval according to category C1.
- Approved by ETAG 001 (ETA Option 1) for use on cracked concrete.
- FOR MASONRY:
- ETAG 029 approved for use in solid and hollow brick.
- FOR RETROFITTED REINFORCING BEAMS:
- ETA approval and German national approval.
- FOR SEISMIC LOADING:
- Seismic load approval according to category C1.
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 Type N, HSS Rolled (Ø 4 mm)- High-performance rolled, steam-treated twist drill made from heavy-
duty high speed steel.
- The manufacturing procedure (no structural disruption) solidifies the
material making it more elasticated.
- This makes it more resistant to fracture and suitable for robust
drilling units. (e.g. hand-held drilling machines)
duty high speed steel.
- The manufacturing procedure (no structural disruption) solidifies the
material making it more elasticated.
- This makes it more resistant to fracture and suitable for robust
drilling units. (e.g. hand-held drilling machines)
cut-protection-gloves
SHOWA Duracoil 546 PU Cutting Glove Size XLThe SHOWA 546 Cut Resistant Glove with DURACoil liner and reinforced with HPPE, this cut and abrasion resistant glove is an ultra-comfortable multi-purpose work glove. The polyurethane foam palm coating provides good grip and breathability tohands dry inside the glove. An ergonomic, seamless design reproduces the natural curves of the hand for increased dexterity and comfort during long periods of use.
forming-tap-din-2174-hss-co-5
RUKO Definition Thread Male DIN 2174 HSS-Co 5 TiAlN, Rectified (M6)- Main application Steel (N / mm²) <800, steel (N / mm²) <1000, steel (N / mm²) <1200, stainless steel and brass
- Secondary application Aluminum, bronze, plastics, cast iron and titanium alloy
- Secondary application Aluminum, bronze, plastics, cast iron and titanium alloy
fasteners-and-fixings
CHEMITOOL FASTENERS Hexagon Head Bolt Screw Full Thread DIN 933 1/2X35 A4...- Hexagon Head Bolt Screw Full Thread Passivated Stainless Steel;
- DIN 933;
- Material: A4;
- Finishing: Passivated Stainless Steel.
- DIN 933;
- Material: A4;
- Finishing: Passivated Stainless Steel.