Pattex SP101 Foam

How to use:
- The substrates must be clean of dust, grease and moisture.
- Moisten the substrates with a sprayer to improve foaming and speed up the reaction. Surfaces can be damp, but not icy or frozen.
- Fit the aerosol into the spray nozzle and shake several times before use (15-20 times).
- The product should always be used in an inverted position and in well-ventilated areas.
- Adjust the dose by pressing the valve.
- Fill the joint halfway to avoid excess product after expansion.
- Repeat agitation regularly during application. Substrates:
- Suitable for materials such as concrete, aerated concrete, cement, ceramics, tiles, plaster, stone, granite, glass, painted metals, wood, fiberglass, PVC, plastics;
- Not suitable for silicone, Teflon, PE and PP;
- Other substrates must be tested beforehand.