TALOCHA INOX DENTADA 10X10MM BIMATÉRIA

-Set of torque wrenches with interchangeable heads.

- 100% cotton.
- Triple stitching on legs.
- Pocket for tape measure.
- Side pocket with LOCK SYSTEM closure.
- Reflective tapes in the back pocket.

-Set of King Tony 10 mm bits 44 elements in EVA foam 140 x 375 mm.

Empty Tray.

- Mesh sanding sheets last at least four times longer than traditional DeWalt sandpaper sheets.
- Fibres are drawn away from the surface into the small holes, and don‘t sit between the material to be sanded and the abrasive grains. This optimises the sanding effect.
- Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper.

- Replacement cover Key adapter with viewing window.

- Genuine Milwaukee accessories;
- 8 Tpi = smooth burr free holes;
- Thin wall - 0.6 mm thick = less resistance;
- Shallow cup optimised for drilling thin metal;
- 1/4″ Hex shank = impact driver compatible.

- TORX® Bit;
- Silicon chrome vanadium alloy steel (S2);
- Anti-rust oiled, sand-blasted.

- 100% cotton.
- Double zip fastening.
- Elastic at cuffs and waist.
- Double stitching between the legs.

- Exceptionally suitable for work on wear- resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc.
- Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
- Also highly suitable for work on extremely hard materials such as tungsten carbide, glass, ceramics, enamel, stone and GRP/CRP.
- Abrasive: Diamond.

- Genuine MILWAUKEE accessories;
- One piece solid steel tool;
- Increased lifetime;
- Supplied with pilot drill bit and ejector tool.