MANÍPULO AJUSTE ALTURA DO FUSO

The Scuff Caps series is one of the most successful safety shoe concepts, specially designed and developed for the construction sector, mechanical engineering and industry.

-To rotate the pistons in the calliper to make room for new pads.

- High flexibility.
- Adapts to contours and curved surfaces.

Chrome Alloy Steel, chrome plated.

DIN 3124/ISO 2725-1, ASME B 107.5 M, AS-drive and HPQ® high performance steel up to size 38, chrome plated.

- Genuine MILWAUKEE accessories;
- Supplied in: Plastic case;
- 100% Faster- Speed and time savings are achieved due to the following factors. Firstly the annular cutter principle of only -cutting material from the periphery of the hole as opposed to the twist drill which must cut the complete diameter of the hole. Secondlythe benefit of two aggressive sharp angles per cutting edge help to achieve faster feed rates and lower cutt-ing resistance;
- 30% More productivity- Because the annular cutter is only cutting material from the periphery of the hole. Less motor energy and driving power is required. The larger the drill diameter the greater the energy saving.

For aggressive grinding with the highest stock removal rates on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL

In sturdy, stackable ABS plastic case.

Chrome Alloy Steel, chrome plated.