home
STAHLWILLE 1/2' IMPACT Socket 14 mm1/2 Inside Square-drive, DIN 3129/ISO 1711-2, for power drivers, Chrome Alloy Steel, gunmetal finish.
KING TONY 1/4' BSPT Air Ratchet Wrench
Ready to Ship
KT37235-030
Add to cart
40,00 €
and shipping is free
|
|||||
|---|---|---|---|---|---|
| Datasheet \ Reference KT37235-030 | |||||
KING TONY 1/4' BSPT Air Ratchet Wrench |
|||||
|
Description |
||||
PRODUCTS DATA
|
|||||
16 other products in the same category:
lv-075-parafuso-cabeca-extra-plana
CHEMITOOL FASTENERS Self Tapping Screw Extra Low Head PHILLIPS LV075 4,2x32...- Extra Plane Philips Head Self Drilling Screw;
- LV 075;
- Material: Steel.
- LV 075;
- Material: Steel.
din-94-chaveta-1-2-cana
CHEMITOOL FASTENERS Split Spin ½ DIN 94 10x80 White Zinc plated- Split Pin ½ White Zinc plated;
- DIN 94;
- Material: Spring steel;
- Finishing: White Zinc plated.
- DIN 94;
- Material: Spring steel;
- Finishing: White Zinc plated.
din-9021a-anilha-de-chapa-plana
CHEMITOOL FASTENERS Flat Washer DIN 9021A M18 A2 Passivated Stainless Steel-Wide Flat Plate washer DIN 9021 M18 A2 Passivated Stainless Steel.
hacksaw-blade-hss-co-bihart-cobalt
IRWIN Jack® Bowsaw Blade Dry Wood 533 mm- Triple-ground teeth;
- 1mm rigid blade;
- Deep gullets;
- Fine nose teeth;
- Soft-grip handle with finger guide;
- Hard point teeth;
- High quality C75 steel blade;
- Water based lacquer.
- 1mm rigid blade;
- Deep gullets;
- Fine nose teeth;
- Soft-grip handle with finger guide;
- Hard point teeth;
- High quality C75 steel blade;
- Water based lacquer.
home
KING TONY TORX® T20 T- Type Wrench- TORX® T- Type wrench;
- Material - SNCM - V alloy steel;
- Finishing - chrome and polished finish with black tip.
- Material - SNCM - V alloy steel;
- Finishing - chrome and polished finish with black tip.
home
KING TONY Shaft Puller with Sliding Hammer-5 lb / 2.2 kg sliding hammer.
-500 mm T-handle shaft.
-500 mm T-handle shaft.
home
PFERD High Performance MICRO Ø6x16mm WRC Cylindrical Carbide Burr- High surface quality;
- Compared to grinding pins, there is no change in geometry due to wear/wear;
- Machining of almost all materials up to 68 HRC;
- Thanks to the precise concentricity, impact-free work without chatter marks is possible. This significantly reduces wear on the tool and tool drive.
- Compared to grinding pins, there is no change in geometry due to wear/wear;
- Machining of almost all materials up to 68 HRC;
- Thanks to the precise concentricity, impact-free work without chatter marks is possible. This significantly reduces wear on the tool and tool drive.
home
PFERD Combiclick Fibre Discs CC-FS Aluminium Oxide A-COOL G60 180 mm- For universal grinding work from fine to very fine grinding on materials which do not conduct heat well, e.g. stainless steel (INOX) and aluminium.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Aluminium oxide A-COOL.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Aluminium oxide A-COOL.
broca-multi-material-convencional
DeWalt Multi-Material Drill Bit 6x123x93mm- Faster Drilling.
- Can be used in wood, masonry and metal.
- Alows drilling near to corners and edges.
- Can be used in wood, masonry and metal.
- Alows drilling near to corners and edges.
fita-de-serra-para-metal
CHEMITOOL CUTTING Band Saw Blades Power M42C 3550X27MM 5/8- 8% Co teeth (M42).
- High cutting performance.
- Uniform welding.
- Resistance to breakage.
- Long tool life.
- High cutting performance.
- Uniform welding.
- Resistance to breakage.
- Long tool life.