From A to Z, the CHEMITOOL FASTENERS offers a full range of innovate solutions - since tuning washers to cylindrical pins, from DIN 1 to DIN 82101, with sizes from M1x2 to M72x600.
From A to Z, the CHEMITOOL FASTENERS offers a full range of innovate solutions - since tuning washers to cylindrical pins, from DIN 1 to DIN 82101, with sizes from M1x2 to M72x600.
- These sandpaper holders have a smaller elasticity and are therefore more suitable for sanding corners and edges. - Standard sanding tape holder: Hardness approx. 65- 70 Shore A.
- Excellent quality/value ratio; - High-Speed Stel M35 5% Co and M42 8% Co; - Fully rectified; - High material removal capacity; - Short and long version; - Resistant to breakage; - Long tool life.
- DEWALT HCS jigsaw blades are engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics - Made from High Carbon Steel
Because of the CBN deep-ground flutes the cutting edges are extremely sharp. Ideal for burr- and chatter-free deburring and countersinking. Best results at low cutting speeds.
136 % acrylic enamel for exterior and interior; -Indicated to treat various surfaces of wood, metal, glass, ceramics, stone surfaces, varnished, plastic,etc.; -Quick drying.
-The unit is installed in the pneumatic line and is designed to prepare compressed air (filtering, adjusting and adding oil) for pneumatic tools and equipment.
- For coarse grinding work with a high stock removal rate and a long tool life. - Abrasive: Zirconia alumina Z. - Recommendations for use: Use with hard or medium-hard COMBIDISC abrasive disc holders.
