PFERD Tc Burrs For High-Performance Applications - Inverted Cones Wkn Without End Cut 0307/3 Cut 5

ADVANTAGES
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life. The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy. The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).

- Inverted cone-shaped burr, tapered towards the shank according to DIN 8032 with cut conforming to DIN 8033.
- Shape WKNS with end cut

- Inverted cone-shaped burr, tapered towards the shank according to DIN 8032 with cut conforming to DIN 8033.
- Shape WKNS with end cut

ADVANTAGES
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life. The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy. The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).

- Inverted cone-shaped burr, tapered towards the shank according to DIN 8032 with cut conforming to DIN 8033.

ADVANTAGES
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life. The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy. The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).

- Inverted cone-shaped burr, tapered towards the shank according to DIN 8032 with cut conforming to DIN 8033.
- Shape WKNS with end cut

- Inverted cone-shaped burr, tapered towards the shank according to DIN 8032 with cut conforming to DIN 8033.

- Inverted cone-shaped burr, tapered towards the shank according to DIN 8032 with cut conforming to DIN 8033.