MILWAUKEE THUNDERWEB - DIN 338 - 5 and 10 Pack - 5.5 x 93 - 10 pcs
Ready to Ship
4932352389
- Genuine MILWAUKEE accessories;
- Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the Thunderweb core is thicker than that of a standard drill bit;
- Parabolic web cross section: Large web thickness. Strength built in;
- Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time;
- 135° Split point - Precision starting, drill bit won't walk on material surface;
- Polished finish reduces friction and extends drill bit life.
- Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the Thunderweb core is thicker than that of a standard drill bit;
- Parabolic web cross section: Large web thickness. Strength built in;
- Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time;
- 135° Split point - Precision starting, drill bit won't walk on material surface;
- Polished finish reduces friction and extends drill bit life.
Add to cart
40,00 €
and shipping is free
Datasheet \ Reference 4932352389 | |||||||
MILWAUKEE THUNDERWEB - DIN 338 - 5 and 10 Pack - 5.5 x 93 - 10 pcs |
|||||||
Description- Genuine MILWAUKEE accessories; |
|||||||
PRODUCTS DATA
|
|||||||
SPECIFICATIONS
|
16 other products in the same category:
-Turned using the hex wrench or a 1/2-12 mm ratchet that has a through hole for a rod.
home
STAHLWILLE Circlip Plier for Inside Circlips, Mattchrome Plated Head and...DIN 5256 D, bent 90°, H.D. drop forged, precision points. Mattchrome Plated Head and Chrome Plated, Chequered Handle.
home
KING TONY 1/2' Extension Bar Set - 4 (un.)-A set of professional quality standard extensions made from high quality chrome vanadium steel alloy with square drive.
home
PFERD Wheel Brushes, Pipeline - Steel Wire (ST) RBG 17806/22,2 Pipe ST 0,50...- Aggressive and robust brush that is able to withstand high mechanical loads.
- Perfect for heavyduty brushing in pipeline and container construction.
- Perfect for heavyduty brushing in pipeline and container construction.
home
KING TONY 1/2” DR. Impact Bit Socket H16- Material: Chrome molybdenum alloy steel;
- Finishing: Phosphate sunk.
- Finishing: Phosphate sunk.
home
IRWIN SPEEDHAMMER POWER Construction Bit Ø7 mm/160 mm- Double carbide tip;
- Optimized tip design with double cutting edge;
- Geometry of the spiral maximized;
- Top-grade steel;
- Blue ring;
- Optimized slot design.
- Optimized tip design with double cutting edge;
- Geometry of the spiral maximized;
- Top-grade steel;
- Blue ring;
- Optimized slot design.
home
KRAFFT 650ml Silicone-Free Polish (Cleaner + Brightener)Special polish, without silicone, based on high quality waxes and controlled abrasives. Especially suitable for the professional body builder. It does not cause problems in the painting process because it does not contain silicones. Easy to apply and excellent results. It is used in the polishing and finishing of paint.
home
KING TONY H6mm 3/8' Impact Bit Socket 90mm- For hexagon head screw;
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
- DIN 3121;
- Material - chrome molybdenum alloy steel;
- Finishing - phosphate sunk.
home
PFERD Rubber Drum Holders Cylindrical GK 5125/6- These sandpaper holders have a smaller elasticity and are therefore more suitable for sanding corners and edges.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.
- Standard sanding tape holder: Hardness approx. 65- 70 Shore A.
home
MILWAUKEE RED COBALT - DIN 338 Metal Drill Bits HSSGC 1.0 x 34 - 2 pcs- Genuine MILWAUKEE accessories;
- Metal drill bits ground from solid extremely heat resistant cobalt-alloyed high speed steel produced according to DIN 338;
- Split point shaped cutting tip with 135° angle for improved centering - no center punch required;
- 5% Cobalt content. Withstands high drilling heat;
- Type N flute normal angle;
- Suitable for drilling high alloy content steels and metals with tensile strengths over 1000 N/mm² like heat and acid proof steelsand stainless steel.
- Metal drill bits ground from solid extremely heat resistant cobalt-alloyed high speed steel produced according to DIN 338;
- Split point shaped cutting tip with 135° angle for improved centering - no center punch required;
- 5% Cobalt content. Withstands high drilling heat;
- Type N flute normal angle;
- Suitable for drilling high alloy content steels and metals with tensile strengths over 1000 N/mm² like heat and acid proof steelsand stainless steel.