KRAFFT 650ml Silicone-Free Polish (Cleaner + Brightener)
Available
KF14263
Special polish, without silicone, based on high quality waxes and controlled abrasives. Especially suitable for the professional body builder. It does not cause problems in the painting process because it does not contain silicones. Easy to apply and excellent results. It is used in the polishing and finishing of paint.
Add to cart
40,00 €
and shipping is free
|
|||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference KF14263 | |||||||||||||||||||||
KRAFFT 650ml Silicone-Free Polish (Cleaner + Brightener) |
|||||||||||||||||||||
|
DescriptionSpecial polish, without silicone, based on high quality waxes and controlled abrasives. Especially suitable for the professional body builder. It does not cause problems in the painting process because it does not contain silicones. Easy to apply and excellent results. It is used in the polishing and finishing of paint. |
||||||||||||||||||||
PRODUCTS DATA
|
|||||||||||||||||||||
SPECIFICATIONS
|
|||||||||||||||||||||
16 other products in the same category:
tocha-mig-mag-standard
CHEMITOOL MIG Torches 501A 4 MetersSuitable for welding work;
-The nozzles have a larger or smaller diameter bore depending on the thickness to be cut.
-The nozzles have a larger or smaller diameter bore depending on the thickness to be cut.
din-933-parafuso-sextavado-rosca-total
CHEMITOOL FASTENERS Hexagon Head Bolt Partial Thread DIN 931 M24X150 8.8 Hot...- Hexagon Head Bolt Partial Thread Hot Dip Galvanized;
- DIN 931;
- Material: 8.8;
- Finishing: Hot Dip Galvanized.
- DIN 931;
- Material: 8.8;
- Finishing: Hot Dip Galvanized.
home
DASSY Miami Work Trousers n.º 66 +/- 300 g/m² Black'- Work trousers with knee pockets.
- These work trousers do not only have many practical pockets, they are also reinforced in strategic areas with the extremely resistant Cordura® fibre. What's more, the Cordura® knee pockets can be adjusted in height to ensure that your knee pads are in the best position to protect your knees. Do you prefer two-tone work trousers? The DASSY®Boston is just right for you!
- PESCO 64, +/- 300 G/M²
- These work trousers do not only have many practical pockets, they are also reinforced in strategic areas with the extremely resistant Cordura® fibre. What's more, the Cordura® knee pockets can be adjusted in height to ensure that your knee pads are in the best position to protect your knees. Do you prefer two-tone work trousers? The DASSY®Boston is just right for you!
- PESCO 64, +/- 300 G/M²
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 3,60mm)- Main application Steel (N / mm²) <900 and cast iron
- Secondary application Brass and bronze
- Secondary application Brass and bronze
lima-de-precisao-meia-cana
LIMA 2402 180 MM H0
din-7337a-rebite-cego-cabeca-boleada
CHEMITOOL FASTENERS Blind Rivet Dome Head DIN 7337A Ø5x12 Steel- Blind Head Rivet Steel;
- DIN 7337A;
- Material: steel.
- DIN 7337A;
- Material: steel.
casquilho-redondo
BRONZE CB3 CASQUILHO 36X14 5,3KG
carbide-cutting-straight-shank-drill
DeWalt Mansory Drill Bit 8x150mm- Rotary/percussion masonry drill bit 130° Douglas form carbide tip.
- Shank diameter of drill bits 10-13 mm is reduced to 9.5 mm.
- Shank diameter of drill bits larger than 13 mm is reduced to 12.7 mm.
- Shank diameter of drill bits 10-13 mm is reduced to 9.5 mm.
- Shank diameter of drill bits larger than 13 mm is reduced to 12.7 mm.