Aluminium/Steel Flower Head Wide Rivet 4,8x12mm BRALO

- Conical male thread ISO 7 (BSPT)- DIN 2999- BS 21 with PTFE.

-Replacement nylon clips for 1390N.

- 41 S1P Blue Navy Typica Shoes.

DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3709 (test loads), HPQ® high performance steel, chrome plated.

- T2™ Technology Tooth design delivers up to 2x the life versus previous model.

- Drawer 54x27E (WxD) 918x459mm FH 150mm 200kg Standard Light grey RAL 7035.

- Developed for joiners and carpenters.
- Suitable for machine sanding of wooden surfaces.

- Genuine MILWAUKEE accessories;
- Metal drill bits ground from solid extremely heat resistant cobalt-alloyed high speed steel produced according to DIN 338;
- Polished finish. Split point shaped cutting tip with 135° angle for improved centering - no center punch required;
- 5% Cobalt content withstands high drilling heat.

-Long type with hexagonal mouth, in chromed steel and polished heads.

- Velcro-backed abrasive discs are suitable for fine- grinding large surfaces using eccentric orbital sanders and can be universally used on metal, wood, plastic and paintwork.
- The velcro-backed abrasive discs with extraction holes are realized in shape A in compliance with ISO 21951.
- For universal grinding work from coarse to fine grinding in industry and professional trades.
- Abrasive: Aluminium oxide A.

- Particularly suitable for deburring and cleaning pipes, threads, coupling sleeves and cylinders. In addition to a thread, some versions also have a shank:
- M6 thread: 6 mm shank;
- 3/8 thread: 10 mm shank.

- 2 D-shaped steel positioning washers.
- 45mm polyester straps.
- Metal buckle with adjustment.
- Padded to avoid discomfort.

- Flex-O-Post.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.