STARRETT Magnetic Base with Flex-O-Post Rod
Ready to Ship
STA3657MTW
- Flex-O-Post.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference STA3657MTW | |||||||
STARRETT Magnetic Base with Flex-O-Post Rod |
|||||||
|
Description- Flex-O-Post. |
||||||
PRODUCTS DATA
|
|||||||
SPECIFICATIONS
|
|||||||
16 other products in the same category:
home
KING TONY 5/8'x11/16' Inch Open End Wrench-Flat flat slim fixed key.
-Tool in inches.
-Made from chrome vanadium steel.
-Tool in inches.
-Made from chrome vanadium steel.
din-7973c-parafuso-cabeca-lentilha-fenda
CHEMITOOL Raised Countersunk Head Tapping Screw DIN 7973C 4,2x9,5 White Zinc...- Raised Countersunk Head Tapping Screw White Zinc Plated;
- DIN 7973C;
- Material: Steel.
- DIN 7973C;
- Material: Steel.
chaves-de-parafusos-fenda
4622-6-2,5X14,0X250 CHAVE FENDA
home
MEGA Hydraulic Jack - GR2 Line 2t Safety Lock- Safety overload valve;
- Limitation of hydraulic stroke;
- Operation by the principle of dead man;
- LCS lowering system.
- Limitation of hydraulic stroke;
- Operation by the principle of dead man;
- LCS lowering system.
retentores
RETENTOR
home
DeWalt 1/2' Hex to 1/4' Square Conversion Adapter (52mm)- CNC precisely machined bit with a torsion zone to absorb peaks in torque Allows optimum bit flex for maximum life in Impact/High Torque applications
- Longer life, faster, more accurate screw driving thanks to a specially designed bit tip which optimises the fit into the fastenerEliminates wobble and stripped screws
- Preferred by professional users for maximum hold, tight access and no run out Bit tip holder innovation combines the 10 times magnetic screw lock system with easy to use, versatile products including an Aluminium Screw Lock Sleeve for use with 50mm+ torsion bits, an 85mm bit tip holder with removable sleeve for use with 25mm bits, and a compact rapid load for use with 25mm+ bits Excellent hold, reach, stability and accessibility in all screw driving applications even the most awkward to reach
- Longer life, faster, more accurate screw driving thanks to a specially designed bit tip which optimises the fit into the fastenerEliminates wobble and stripped screws
- Preferred by professional users for maximum hold, tight access and no run out Bit tip holder innovation combines the 10 times magnetic screw lock system with easy to use, versatile products including an Aluminium Screw Lock Sleeve for use with 50mm+ torsion bits, an 85mm bit tip holder with removable sleeve for use with 25mm bits, and a compact rapid load for use with 25mm+ bits Excellent hold, reach, stability and accessibility in all screw driving applications even the most awkward to reach
din-7505a-parafuso-cabeca-embeber
CHEMITOOL FASTENERS Flat Head Screw Pozidrive for Particle Board 5x80 4.8 DIN...
fasteners-and-fixings
DeWALT Nail Ribbon Pat Ø3,7X52 Fulminant Blue- Suitable for Hilti DX460/DXA40/DXA41 and other brands of tools.
resina-quimica-base-epoxy-acrilato
CHEMITOOL 300 ml Epoxy Chemical Anchor ChemiresCHEMIRES Epoxy Chemical Anchor is a two component chemical anchoring injection system. A formulation derived from epoxy acrylate resin with high bond strength, developed principally to anchor threaded rods into concrete
home
KING TONY 3/8' 80~115 mm Two Jaws Oil Filter Wrench-Manufactured in chrome molybdenum steel.
-Phosphatized anti-rust finish.
-Design with system of springs and toothed gear.
-Phosphatized anti-rust finish.
-Design with system of springs and toothed gear.
tungsten-carbide-hole-saw
SERRA PAST. LOS HM 3508
chaves-de-caixa
KING TONY 21x23mm Double-Ended Tubular Wrench- Double end socket wrench for the hollow tube design, a longtype screw may be used;
- Chrome vanadium alloy steel;
- Chrome plated.
- Chrome vanadium alloy steel;
- Chrome plated.
tungsten-carbide-burr-a-cylinder-zya
FRESA TUNGS. ZYAS 0313 D3P M3 GL 75Cylindrical burr according to DIN 8032 with cut conforming to DIN 8033.