EXENA 37 S3 Composite Timor Shoes

- Flex-O-Post.
- On-off switch.
- V shaped bottom part of the base for clamping on tree, shaft and vice plates.
- Locking lever. Tension the inner cable to lock the arm in position.
- Adjusting Clamp with locking nut to maintain proper degree of rigidity of the shank.
- The base has two magnetic surfaces. Maintains grip in horizontal, vertical and upside down positions.
- Clock clamp at end of arm can be rotated 360° and locked in any position.
- Pin Clamp has a 9.5mm (3/8) hole (which clamps AGD dial clocks by means of the shank).
- Vertical range of approximately 380mm (15) and horizontal range of 250mm (10)
- Provides fine adjustments by turning the screw to the zero position (with the arm locked) and then adjusting the clock.

- Genuine MILWAUKEE accessories;
- 28 mm Hex 400 x 125 mm Spade Chisel -1 pc;
- For general ladscaping work and road construction i.e. digging in hard compacted soil, clay and gravel.

- Genuine Milwaukee accessories;
- Impact rated drill bit with ¼″ hex shank optimised for impact drivers;
- Content: ø 3 / 3.5 / 4 / 4.5 / 5 / 6 / 7 / 8 / 9 / 10 mm.

-Open Ended Lunette Key Set with 6 units.

- Developed with rigid thermoplastic.
- Flexible and resistant. Ideal for the most demanding jobs.

- Genuine MILWAUKEE accessories;
- Breaker Points. 3 offset aggressive power breakers. These produce a
Demolition effect and create micro cracks in the drilled material. Up to
25% FASTER.

- High initial cutting capacity.
- Fast material removal.

DIN 133, Special Tool Steel, grey finish.