Cutting Tools

fita-de-serra-para-metal

LENOX 2570x27x0,9 Z4/6 Classic Saw Band

- Aluminum / non-ferrous applications;
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.

Available

twist-drill-din-338-n-hss-g

RUKO Twist Drill 10,7mm DIN 338 type N, HSS Rolled

High-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity.
Thanks to the split point, this drill has good centring properties and requires little pressure.

Available

broca-retificada-40-hsse-co-5-polegada

BROCA TL3000 DIN 338 5/32

Available

aco-38-hrc-desbaste-de-bordo

MO MONTADA B82 3 AR 100 O 5V

Available

broca-retificada-40-hss-g-polegada

BROCA TL3000 DIN338 HSS-G 1/8

Available

lamela-de-perno-para-metal

PFERD Mounted Flap Wheels Shank 6 mm Aluminium Oxide A G240 40 x 15 mm

- For universal applications from coarse to fine grinding.
- Abrasive: Aluminium oxide A.

Available

twist-drill-din-338-n-hss-g

RUKO Spiral Bits DIN 338 Type N, HSS-G TiN (Ø 1,00mm)

- Main use Steel (N / mm²) <900 and cast iron

- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics

Available

cutting-tools

Ruko HSSE-Co5 Accessory for Cranial Saws (Ø6,0mm)

Available

fita-de-serra-para-metal

CHEMITOOL CUTTING 3960mm Bandsaw Z6/10

- 8% Co teeth (M42).
- High cutting performance.
- Available from 1310 to 6000mm diameter.
- Height from 13 to 34mm.
- Resistance to breakage.
- Long tool life.

Available

twist-drill-din-338-n-hss-g

IRWIN TCT Bit HSS PRO - DIN 338 Ø13,5x160 mm

- Rectified four-sided hard metal tip;
- Super deep double groove;
- Reduced groove;
- Vanadium chrome steel body;
- The coolant should always be used.

Available

twist-drill-din-338-n-hss-g

TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 5,5 mm)

- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.

Available

descascadores-de-tinta

PFERD Paint Peeler LAH Z3

The small design of the paint peeler enables work in hard-to-reach areas. It is used for finishing the smallest painted surfaces with the corresponding plastic holder. This plastic holder allows for very fine adjustment of the file using two adjusting screws. Suitable for smoothing, correcting painting faults such as impurities, dust particles and air bubbles as well as removing extremely thin paint layers.

Available

fita-de-serra-para-metal

CHEMITOOL CUTTING Band Saw Blades Power M42C 2450X27MM Z8/12

- 8% Co teeth (M42).
- High cutting performance.
- Uniform welding.
- Resistance to breakage.
- Long tool life.

Available

twist-drill-din-338-n-hss-g

TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 8 mm)

Available

fresas-para-aluminio-curta

CHEMITOOL CUTTING Ø5x60/12-Ø8mm Co8 Short HSS End Mill Cutters for Aluminum/PVC

- Excellent quality/value ratio;
- High-Speed Stel M35 5% Co and M42 8% Co;
- Fully rectified;
- High material removal capacity;
- Short and long version;
- Resistant to breakage;
- Long tool life.

Available

disco-de-corte-metal-estacionario

PFERD Cut-Off Wheels for Stationary Applications Universal PSF, 80 m/s, Flat...

- Tool of hardness K, which cuts very easily, with a middle fabric.
- For aggressive cutting with minimized burr formation.
- Materials that can be worked: steel.
- Applications: cutting of solid material, sections and pipes.
- Abrasive: Aluminium oxide A.

Available

fita-de-serra-para-metal

CHEMITOOL CUTTING Band Saw Blades Power M42C 2450X27MM 6/10

- 8% Co teeth (M42).
- High cutting performance.
- Uniform welding.
- Resistance to breakage.
- Long tool life.

Available

twist-drill-din-338-n-hss-g

RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 3,80mm)

- Main application Steel (N / mm²) <900 and cast iron

- Secondary application Brass and bronze

Available

twist-drill-din-338-n-hss-g

RUKO Spiral Bits DIN 338 Type VA, HSSE-Co5 (Ø 9,70mm)

- Main use Steel (N / mm²) <900 and cast iron

- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics

Available

disco-de-fibra-para-metal

PFERD Fibre Discs Fibre Discs FS Aluminium Oxide A G36 125 mm

- For universal grinding work from coarse to fine grinding in industry and professional trades.
- Abrasive: Aluminium oxide A.

Available

tungsten-carbide-burr-m-cone-skm

PFERD Tc Burrs For Universal Applications - Conical Pointed Shape Skm 0618/6...

- Conical pointed burr according to DIN 8032 with cut conforming to DIN 8033, flattened tip.

Available

broca-retificada-36-hsse-co-5-branca

BROCA 4,1MM DIN 338 TL3000

Available

lamela-de-perno-para-acabamento-misto

PFERD Polinox Mounted Grinding Wheels PNZ Aluminium Oxide A G100 40 x 20 mm

- The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers.
- This flap structure facilitates improved stock removal and achieves a coarser surface finish.
- Abrasive: Aluminium oxide A.

Available