Sort by:
lima-de-precisao-quadrada
PFERD Needle Precision Files 2408 180 MM H2PFERD needle files are ideally suitable for work on the smallest surfaces, breakthroughs, geometries, profiles and radii.
folha-de-lixa-metal-base-de-pano
(UN) FOLHA LIXA METAL HD 230x280 P150
disco-de-rebarbar-metal
PFERD Depressed-Centre Grinding Wheels SG STEEL E 230-7 A24 R SG/22,23- Grinding wheel for steel with high grinding performance and very long tool life.
- Fast work progress and maximum economic efficiency thanks to the high grinding performance.
- Fewer tool changes due to the very long tool life.
- Fast work progress and maximum economic efficiency thanks to the high grinding performance.
- Fewer tool changes due to the very long tool life.
twist-drill-din-338-n-hss-g
RUKO Espiral Bits DIN 1897 Tipo N, HSSE-Co5 - Short (Ø 5,90mm)- Main use Steel (N / mm ²) <900, Steel (N / mm ²) <1100 and stainless steel
- Secondary use Titanium aliedo
- Secondary use Titanium aliedo
twist-drill-din-340-n-hss-g
CHEMITOOL CUTTING 349X200MM Ø39 DIN345 HSS-G Morse Taper Spiral Fully Ground...- Fully ground;
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
laminas-para-serra-de-sabre-para-madeira
IRWIN WELDTEC Metal Cutting Bi-Metal Reciprocating Blade 624R 150 mm, 24 TPI...- Available in: 10, 14, 18 and 24TPI on metal cutting recips;
- Cuts all metals including non ferrous, pipe conduit,
stainless & sheet metal;
- Suitable for use with materials 1.5 to 10mm (1/16” to 3/8”) thick, dependent on the TPI of the blade.
- Cuts all metals including non ferrous, pipe conduit,
stainless & sheet metal;
- Suitable for use with materials 1.5 to 10mm (1/16” to 3/8”) thick, dependent on the TPI of the blade.
estrela-abrasiva-scotch-furos-bordos
PFERD Non-Woven Tools Polinox Cross Buffs PNST 38-3 A G 80- Suitable for cleaning, deburring and fine grinding of inner surfaces and contours.
- Particularly suitable for hard-to-reach places such as drilled holes and indentations.
- Particularly suitable for hard-to-reach places such as drilled holes and indentations.
broca-sds-max-4c-metal-duro
DeWalt XLR SDS Max With Carbon Head Drill Bit 24x540mm- Drill bit tip delivers effective drilling / breaking longer.
- Drill bit tip maintains its effective drilling / breaking edges longer.
- 4 cutter tip enables a more circular hole to be drilled.
- Drill bit tip maintains its effective drilling / breaking edges longer.
- 4 cutter tip enables a more circular hole to be drilled.
broca-retificada-40-hss-g-tit-alu
RUKO Spiral Bits DIN 338 TL 3000, HSS-G TiAlN (Ø 2,50mm)- Main use Steel (N / mm²) <900
- Secondary use Steel (N / mm²) <1100, aluminum, brass, bronze, plastics and cast iron
- Secondary use Steel (N / mm²) <1100, aluminum, brass, bronze, plastics and cast iron
aco-38-hrc-desbaste-de-bordo
MO MONTADA B103 3 AR 80 O 5 V
disco-de-fibra-para-metais-nao-ferrosos
PFERD Fibre Discs Fibre Discs FS Zirconia Alumina Z-COOL G80 125 mm- For coarse grinding work with a high stock removal rate and cool grinding.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Zirconia alumina Z-COOL.
- Recommendations for use: Use powerful angle grinders in the case of a higher contact pressure.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Zirconia alumina Z-COOL.
- Recommendations for use: Use powerful angle grinders in the case of a higher contact pressure.
lamela-de-perno-para-acabamento-scotch
PFERD Polinox Mounted Grinding Wheels PNL Aluminium Oxide A G280 80 x 50 mm- Made of radially arranged flaps of non-woven abrasive material.
- A long tool life is achieved through the dense packing of the flaps.
- The tool is particularly used for surface work.
- Abrasive: Aluminium oxide A.
- A long tool life is achieved through the dense packing of the flaps.
- The tool is particularly used for surface work.
- Abrasive: Aluminium oxide A.
cutting-tools
PFERD Overlap Slotted Discs G80 30 x 5 mm- Special tool for side grinding in grooves, fillets and slots.
- They are mounted via a central threaded hub.
- Abrasive: Aluminium oxide A.
- They are mounted via a central threaded hub.
- Abrasive: Aluminium oxide A.
disco-de-fibra-para-pedra
BELFLEX Silicon Carbide Abrasive Fibre Back Disc C-36 125 x 22 mm- Fibre discs in Silicon Carbide, suitable for sanding and polishing;
- Use: With angle grinders fixing the disc on a flexible rubber pad;
- Packaging: Box of 25 or 50 discs according to the grain and retractable film of 25 units.
- Use: With angle grinders fixing the disc on a flexible rubber pad;
- Packaging: Box of 25 or 50 discs according to the grain and retractable film of 25 units.
lima-de-precisao-triangular
PFERD Precision Needle File 2407 160 MM H3PFERD needle files are ideally suitable for work on the smallest surfaces, breakthroughs, geometries, profiles and radii.
twist-drill-din-338-n-hss-g
BROCA HELICOIDAL DIN 338 TYP VA
cutting-tools
PFERD Coated Abrasives Short Belts Aluminium Oxide A G120 13 x 457 mmFor universal applications from coarse to fine grinding.
- Abrasive: Aluminium oxide A
- Abrasive: Aluminium oxide A
lima-redonda
PFERD Files Round DIN Series (without Handle) for Universal Use 250 mmRound file with circumferential cut. Version with tang. Shape F according to DIN 7261. Suitable for work on radii and for filing profiles with inner radii.
profundidade-de-corte-30mm
CHEMITOOL CUTTING Ø18 PC=30MM Annular Cutter for Magnetic Drill Machine- Fully ground;
- High drilling performance;
- Available from diameter 12 to 50mm;
- Drill length 30mm (short series);
- Breakage resistance;
- Long tool life;
- 3/4″ Weldon shank;
- Material: High-speed steel M2;
- Suitable for: Steel, aluminium and non-ferrous metals;
- Compatible machine: Magnetic Column Drill Machine.
- High drilling performance;
- Available from diameter 12 to 50mm;
- Drill length 30mm (short series);
- Breakage resistance;
- Long tool life;
- 3/4″ Weldon shank;
- Material: High-speed steel M2;
- Suitable for: Steel, aluminium and non-ferrous metals;
- Compatible machine: Magnetic Column Drill Machine.
lima-chata
PFERD Files Flat DIN Series (without Handle) for Fine Processing and...- Rectangular file, tapered and cut on four sides.
- Version with tang. Shape B according to DIN 7261.
- Suitable for filing rectangular geometries.
- Applications:
- Deburring.
- Surface work.
- Work on edges (chamfering, rounding).
- Version with tang. Shape B according to DIN 7261.
- Suitable for filing rectangular geometries.
- Applications:
- Deburring.
- Surface work.
- Work on edges (chamfering, rounding).
lima-chata-paralela
PFERD Parallel Files DIN Series (without Handle) for Universal Use 350 mm- Rectangular file, cut on three sides, one side uncut.
- Version with tang.
- Shape A according to DIN 7261. Suitable for filing rectangular geometries.
- Applications:
- Deburring.
- Surface work.
- Work on edges (chamfering, rounding).
- Version with tang.
- Shape A according to DIN 7261. Suitable for filing rectangular geometries.
- Applications:
- Deburring.
- Surface work.
- Work on edges (chamfering, rounding).
