Sort by:
cutting-tools
PFERD Combidisc Abrasive Discs Silicon Carbide SiC CD G120 50 mm- For universal grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics.
- Particularly recommended for use on titanium alloys.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Abrasive: Silicon carbide SiC.
- Particularly recommended for use on titanium alloys.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Abrasive: Silicon carbide SiC.
twist-drill-din-338-n-hss-g
RUKO Twist Drill 10,75mm DIN 338 type N, HSS RolledHigh-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity.
Thanks to the split point, this drill has good centring properties and requires little pressure.
Thanks to the split point, this drill has good centring properties and requires little pressure.
cutting-tools
PFERD Abrasive Spiral Bands Ceramic Oxide Grain CO-COOL Cylindrical G120 45 x...- For aggressive grinding with maximum stock removal rate on hard and tough materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
aco-38-hrc-desbaste-de-bordo
MO MONTADA ZY0613 3AR 60 O 5V
bi-metal-hss-hole-saw
CHEMITOOL CUTTING HSS M3 Bimetal Hole Saws Ø102MM- Great quality/value ratio;
- Available from diameter 14 to 210mm;
- Variable toothing (4-6TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M3 high speed steel;
- Suitable for: Wood, plastic, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.
- Available from diameter 14 to 210mm;
- Variable toothing (4-6TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M3 high speed steel;
- Suitable for: Wood, plastic, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.
lamela-de-perno-para-metal
PFERD Mounted Flap Wheels Shank 6 mm Aluminium Oxide A G150 80 x 40 mm- For universal applications from coarse to fine grinding.
- Abrasive: Aluminium oxide A.
- Abrasive: Aluminium oxide A.
tungsten-carbide-burr-c-oval-wrc
CHEMITOOL CUTTING DIN8032 WRC 8x20/60-Ø6mm Cruzado C-3P Tungsten Carbide Burr- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life;
- Material: Tungsten;
- Suitable for: Steel, stainless steel, copper, bronze, cast iron, low alloy steel;
- Compatible machine: Electric or pneumatic straight grinder.
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life;
- Material: Tungsten;
- Suitable for: Steel, stainless steel, copper, bronze, cast iron, low alloy steel;
- Compatible machine: Electric or pneumatic straight grinder.
aco-38-hrc-desbaste-de-bordo
MO MONTADA SP0816 3AR 80 O 5V
lixa-93x93mm-triangular
DeWalt Detail Sanding Sheet 93mm x 93mm G180- For use with Detail Sanders.
- High quality aluminium oxide grain for superior finish.
- Resin bonding provides excellent grain adhesion and heat resistance for power sanding.
- High quality aluminium oxide grain for superior finish.
- Resin bonding provides excellent grain adhesion and heat resistance for power sanding.
cutting-tools
PFERD Combidisc Abrasive Discs Aluminium Oxide A-Plus CD G80 50 mm- For universal applications from coarse to fine grinding.
- Higher stock removal rate due to sturdy backing material.
- Particularly for use in edge grinding due to high tear strength.
- Abrasive: Aluminium oxide A-PLUS.
- Higher stock removal rate due to sturdy backing material.
- Particularly for use in edge grinding due to high tear strength.
- Abrasive: Aluminium oxide A-PLUS.
serra-craneana-hss-bimetalica-co-8
CHEMITOOL CUTTING HSS M42 Bimetal Hole Saws Ø32MM 8% Cobalt- Great quality/value ratio;
- Available from diameter 14 to 152mm;
- Fine teeth (10TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M42 high speed steel;
- Suitable for: Stainless steel, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.
- Available from diameter 14 to 152mm;
- Fine teeth (10TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M42 high speed steel;
- Suitable for: Stainless steel, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.
serra-craneana-hss-bimetalica-co-8
CHEMITOOL CUTTING HSS M42 Bimetal Hole Saws Ø92MM 8% Cobalt- Great quality/value ratio;
- Available from diameter 14 to 152mm;
- Fine teeth (10TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M42 high speed steel;
- Suitable for: Stainless steel, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.
- Available from diameter 14 to 152mm;
- Fine teeth (10TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M42 high speed steel;
- Suitable for: Stainless steel, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.
macho-maquina-din-374-hss-b-passante
RUKO Male Thread Machine MF DIN 374 HSSE-Co5, Rectified (MF 10, L2 20,0mm)- Main application Steel (N / mm²) <800, steel (N / mm²) <1000, stainless steel and brass
- Secondary application Aluminum, bronze, plastics and cast iron
- Secondary application Aluminum, bronze, plastics and cast iron
broca-cilindrica-para-vidro
Broca para vidro e cerâmica ø 8x83mm
twist-drill-din-338-n-hss-g
CHEMITOOL CUTTING 169X114MM Ø14,50 DIN338 HSS-G BLACKLABEL Spiral Fully...- High Speed Steel M2;
- Fully ground;
- High drilling performance;
- Available from 1,0 to 16mm diameter;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Material: High Speed Steel M2;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
- Fully ground;
- High drilling performance;
- Available from 1,0 to 16mm diameter;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Material: High Speed Steel M2;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
disco-de-corte-metal-estacionario
PFERD Cut-Off Wheels Performance SG 100 m/s, Flat Type T (Shape 41) 100 T...- Tool of hardness Q for fast and economic cutting of rails.
- Materials that can be worked: steel.
- Applications: cutting of rails.
- Abrasive: Aluminium oxide A.
- Materials that can be worked: steel.
- Applications: cutting of rails.
- Abrasive: Aluminium oxide A.
disco-de-lamelas-dobradas-para-inox
BELFLEX Flap Disc Zirconium ZN 120 178 x 22 mm- PROFESSIONAL LINE: Suitable for light grinding of outer surfaces, and applications in steels, soldered joint, alloyed materials, stainless steel and high alloy, castiron, washes, painting, wood, plastic (Zirconium).
carbide-cutting-straight-shank-drill
BROCA TUNG. 14,0mm
disco-de-corte-metal-estacionario
PFERD Cut-Off Wheels Performance SG, 80 m/s, Flat Type T (Shape 41) 80 T...- Tool of hardness L or O with two outer fabrics. For cutting work that requires high stability.
- Materials that can be worked: steel.
- Applications: cutting of solid material, sections and pipes.
- Abrasive: Aluminium oxide A.
- Materials that can be worked: steel.
- Applications: cutting of solid material, sections and pipes.
- Abrasive: Aluminium oxide A.
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Type N, HSS-G Flat (Ø 0,90mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
bi-metal-hss-hole-saw
CHEMITOOL CUTTING HSS M3 Bimetal Hole Saws Ø89MM- Great quality/value ratio;
- Available from diameter 14 to 210mm;
- Variable toothing (4-6TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M3 high speed steel;
- Suitable for: Wood, plastic, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.
- Available from diameter 14 to 210mm;
- Variable toothing (4-6TPI);
- Height of 38mm;
- Break resistant;
- Excellent cutting performance;
- Long tool life;
- Body: M3 high speed steel;
- Suitable for: Wood, plastic, steel, aluminium and non-ferrous metals;
- Compatible machine: Drill machine without percussion.
disco-de-corte-metal-estacionario
PFERD Cut-Off Wheels For Stationary Applications Special Line SGP, Heavy Duty...- Tool for the highest cutting work demands.
- Particularly suitable for use in finishing work.
- Materials that can be worked: steel.
- Applications: cutting of solid material, sections and pipes.
- Abrasive: Aluminium oxide A.
- Particularly suitable for use in finishing work.
- Materials that can be worked: steel.
- Applications: cutting of solid material, sections and pipes.
- Abrasive: Aluminium oxide A.
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 type VA, HSSE-Co 5 Ground(Ø 5 mm)- Powerful right-hand cutting high-performance drill with distinctive heat resistance.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.