Sort by:
profundidade-de-corte-55mm
CHEMITOOL CUTTING Ø30 PC=55MM Magnetic Column Drills- Fully ground.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.
- High drilling performance.
- Available from diameter 12 up to 50mm.
- Drill length 30mm (short series).
- Breakage resistance.
- Long tool life.
- Weldon 3/4 flange.
core-drill-hss-3-4-cbn-weldon
RUKO Crown Drill Bit HSS-TiAlN - Depth Of Cut 30,00 mm (Ø19,00mm)- Main application Steel (N / mm²) <900, aluminum, plastics
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)
core-drill-hss-3-4-cbn-weldon
RUKO Crown Drill Bit HSS - Depth Of Cut 55,00 mm (Ø22,00mm)- Main application Steel (N / mm²) <900, aluminum, plastics
- Secondary application Brass, bronze and cast iron
- Machines: RS10 / RS20 / RS25e / RS30e / RS40e /
RS120 / RS125e / RS130e / RS140e
- Ejector: Ref. N° 108 305 (Ø 6,35 x 102,0 mm)
- Secondary application Brass, bronze and cast iron
- Machines: RS10 / RS20 / RS25e / RS30e / RS40e /
RS120 / RS125e / RS130e / RS140e
- Ejector: Ref. N° 108 305 (Ø 6,35 x 102,0 mm)
broca-craneana-cone-morse
Crank Drills With Hard Metal Edges And Thread Cone TC, Cutting Depth 50,0 mm...core-drill-hss-3-4-cbn-weldon
RUKO Crown Drill Bit HSS - Depth Of Cut 30,00 mm (Ø23,00mm)- Main application Steel (N / mm²) <900, aluminum, plastics
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)
broca-craneana-cone-morse
Crank Drills With Hard Metal Edges And Thread Cone TC, Cutting Depth 50,0 mm...core-drill-hsse-co-5-cbn-quick-in
BROCA CRANEANA 20,0mmbroca-craneana-cone-morse
Crank Drills With Hard Metal Edges And Thread Cone TC, Cutting Depth 50,0 mm...core-drill-hss-3-4-cbn-weldon
RUKO Crown Drill Bit HSS - Depth Of Cut 30,00 mm (Ø50,00mm)- Main application Steel (N / mm²) <900, aluminum, plastics
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)
broca-craneana-3-4-nitto
BROCA HSSCº 14mmcore-drill-hss-3-4-cbn-weldon
BELFLEX Milling Cutter Magnetic Drill Short Serie 50 mm Ø 28 mmcore-drill-hsse-co-5-cbn-quick-in
Broca Craneana HSS Cº 25mmcore-drill-hss-3-4-cbn-weldon
TERRAX by RUKO Core drills HSS with weldon shank (3/4'), cutting depth 30,0...- The 3-edged geometry with spiral grooves allows for extremely high stability of the Solid 3 drill bit and thus prevents the danger of edging due to excessive overloading or jamming of the chips.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.
core-drill-hsse-co-5-cbn-quick-in
BROCA CRANEANA 12,0mmcore-drill-hsse-co-5-cbn-quick-in
Broca Craneana HSS Cº 27mmcore-drill-hss-3-4-cbn-weldon
RUKO Crown Drill Bit HSS-TiAlN - Depth Of Cut 30,00 mm (Ø14,00mm)- Main application Steel (N / mm²) <900, aluminum, plastics
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)
core-drill-hss-3-4-cbn-weldon
BROCA CRANEANA HSS TIN 16X30MM WELDONbroca-craneana-cone-morse
Crank Drills With Hard Metal Edges And Thread Cone TC, Cutting Depth 50,0 mm...broca-craneana-3-4-nitto
BROCA CRANEANA 32MMcore-drill-hss-3-4-cbn-weldon
BROCA CRANEANA HSS TIN 24X30MM WELDONbroca-craneana-cone-morse
Crank Drills With Hard Metal Edges And Thread Cone TC, Cutting Depth 50,0 mm...broca-craneana-3-4-nitto
BROCA HSSCº 13mmcore-drill-hss-3-4-cbn-weldon
RUKO Crown Drill Bit HSS-Co 5 - Depth Of Cut 30,00 mm (Ø34,00mm)- Main application Steel (N / mm²) <900, aluminum, plastics
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)
- Secondary application Brass, bronze and cast iron
- Machines: RS5e / RS10 / RS25e / RS40e / RS125e / RS126e / RS140e
- Ejector: Ref. No. 108 304 (Ø 6.35 x 77.0 mm)