List of products by brand TERRAX by RUKO
TERRAX is a Ruko brand specialized in drills and threads for different materials, such as wood, metal, concrete and sheet. A range composed of holed drills, helical drills, threading tools, cutting taps, among other equipment.
Sort by:
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 type VA, HSSE-Co 5 Ground(Ø 3 mm)- Powerful right-hand cutting high-performance drill with distinctive heat resistance.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.
core-drill-hss-3-4-cbn-weldon
TERRAX by RUKO Core drills HSS with weldon shank (3/4'), cutting depth 30,0...- The 3-edged geometry with spiral grooves allows for extremely high stability of the Solid 3 drill bit and thus prevents the danger of edging due to excessive overloading or jamming of the chips.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 type VA, HSSE-Co 5 Ground(Ø 12,5 mm)- Powerful right-hand cutting high-performance drill with distinctive heat resistance.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 13 mm)- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
core-drill-hss-3-4-cbn-weldon
TERRAX by RUKO Core drills HSS with weldon shank (3/4'), cutting depth 30,0...- The 3-edged geometry with spiral grooves allows for extremely high stability of the Solid 3 drill bit and thus prevents the danger of edging due to excessive overloading or jamming of the chips.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.
core-drill-hss-3-4-cbn-weldon
BROCA CRANEANA HSS 32X30MM WELDON
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 6,8 mm)- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
sds-plus-hammer-drill-2-cutters
BROCA PERCUSSÃO SDS-PLUS 6X110MM
core-drill-hss-3-4-cbn-weldon
BROCA CRANEANA HSS 20X30MM WELDON
core-drill-hss-3-4-cbn-weldon
BROCA CRANEANA HSS TIN 30X30MM WELDON
core-drill-hss-3-4-cbn-weldon
BROCA CRANEANA HSS 12X30MM WELDON
countersinker-din-335-c-90-hss
ESCAREADOR HSS-G TIPO C 90° 10,4mm
core-drill-hss-3-4-cbn-weldon
BROCA CRANEANA HSS 26X30MM WELDON
core-drill-hss-3-4-cbn-weldon
BROCA CRANEANA HSS TIN 24X30MM WELDON
cutting-tools
JOGO BROCAS HSS-G DIN 13-125 MM
caconete-redondo-din-en-22568-hss
TERRAX by RUKO Round Dies M8 DIN EN 22568 HSS- Type: mold B closed, previously opened groove.
- Thread: metric, DIN ISO 13.
- Tolerance: ISO - 6 g.
- Right hand cutting.
- Thread: metric, DIN ISO 13.
- Tolerance: ISO - 6 g.
- Right hand cutting.
sds-plus-hammer-drill-2-cutters
BROCA PERCUSSÃO SDS-PLUS 12X160MM
machine-tap-m-din-371-hss-b
TERRAX by RUKO Machine Taps M12 DIN 371 / 376, Type B, HSS- Machine taps with reinforced shank for through threads.
- Chamfer: type B, 4 - 5 threads with progressive tap.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Chamfer: type B, 4 - 5 threads with progressive tap.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
sds-plus-hammer-drill-2-cutters
BROCA PERCUSSÃO SDS-PLUS 14X260MM
engenhos-de-furar-de-base-magnetica
BERBEQUIM+COLUNA MAGNÉTICA TX900 240V
countersinker-din-335-c-90-hss
ESCAREADOR HSS-G TIPO C 90° 6,3mm
core-drill-hss-3-4-cbn-weldon
TERRAX by RUKO Core drills HSS with weldon shank (3/4'), cutting depth 30,0...- The 3-edged geometry with spiral grooves allows for extremely high stability of the Solid 3 drill bit and thus prevents the danger of edging due to excessive overloading or jamming of the chips.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.
hand-tap-m-din-352-hss
TERRAX by RUKO Hand Taps M6 DIN 352 HSS- Taper tap: 5 - 6 thread chamfer.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.
- Second tap: 4 - 5 thread chamfer.
- Final tap: 2 - 3 thread chamfer.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.
- Tolerance: ISO 2/6 H.