Sort by:
escova-de-limpeza-para-furos
DeWALT Steel Brush for SDS Ø40X300
chemical-products
DeWALT Adhesive Piston Plug 20mm- Tacos available for reinforcing beams for threaded rods.
chemical-products
DeWALT Adhesive Piston Plug 16mm- Tacos available for reinforcing beams for threaded rods.
chemical-products
DeWALT Adhesive Piston Plug 14mm- Tacos available for reinforcing beams for threaded rods.
chemical-products
DeWALT Steel Brush for SDS Ø26X300- ETA approved steel brushes and extensions for installation of adhesive anchors.
chemical-products
DeWALT Chemical Resin 150-Pro 385ml- Pure epoxy mortar with ETA Option 1 approval for use on cracked and crack-free concrete.
food-grade-aerosols
GRAND PRIX Machine Cleaner SprayQuick drying Cleaning Spray for industrial equipments;
-Solvent base to obtain a higher yield equipment;
-Quickly dissolves grease, oil, lubricants, tar and adhesives of any metal part. Leaves no residue;
-Compatible with most plastics and rubbers;
-Un/Box: 12x500ml Approved use in the Food Industry NSF-H1140010.
-Solvent base to obtain a higher yield equipment;
-Quickly dissolves grease, oil, lubricants, tar and adhesives of any metal part. Leaves no residue;
-Compatible with most plastics and rubbers;
-Un/Box: 12x500ml Approved use in the Food Industry NSF-H1140010.
pasta-de-desbaste-soluvel-feltros
PASTA POLIR SFP 800
chemical-products
DeWALT Adhesive Piston Plug 25mm- Tacos available for reinforcing beams for threaded rods.
chemical-products
DeWALT Steel Brush for SDS Ø14X170mm- ETA approved steel brushes and extensions for installation of adhesive anchors.
escova-de-limpeza-para-furos
DeWALT SDS Connection for Steel Brushes- Steel brushes and extensions for installation of ETA approved adhesive anchors.
fluido-de-lubrificacao
RIDGID Thread Cutting Oil 5 Litres Synthetic
espuma-de-poliuretano-b3
CHEMITOOL Manual Type Polyurethane Foam B3 Chemifoam- Chemifoam Polyurethane Foam B3 is a mono-component polyurethane foam-based assembly sealant that cures in contact with ambient humidity. The cured product is rigid and has a thin structure of partially closed cells.
aplicadores
ANI KIT SAM/3-CS Gun for Single-component Sealants for 310ml CartridgesKIT SAM/3-CS gun for single-component sealants for 310ml cartridges.
pistolas
DeWALT 385/585ml Manual Dispenser- A range of dispensing tools for use with DEWALT adhesive anchors.
pasta-de-polir-metal-duro-diamantada
PFERD Diamond Polishing Paste- High productivity;
- Quick results;
- Coordinated selections of grits.
- Quick results;
- Coordinated selections of grits.
escova-de-limpeza-para-furos
DeWALT Nylon Cleaning Brushes 8-10- Nylon brush for quick cleaning of drilled holes.
acrylic-paints
GRAND PRIX Yellow Acrylic Paint RAL 1003100 % acrylic enamel for exterior and interior;
-Indicated to treat various surfaces of wood, metal, glass, ceramics, stone surfaces, varnished, plastic,etc.;
-Quick drying.
-Indicated to treat various surfaces of wood, metal, glass, ceramics, stone surfaces, varnished, plastic,etc.;
-Quick drying.
chemical-products
DeWALT 150ml AC100-PRO Chemical Resin- FOR BETON:
- Approved by ETAG 001 (ETA Option 1) for use on cracked concrete.
- FOR MASONRY:
- ETAG 029 approved for use in solid and hollow brick.
- FOR RETROFITTED REINFORCING BEAMS:
- ETA approval and German national approval.
- FOR SEISMIC LOADING:
- Seismic load approval according to category C1.
- Approved by ETAG 001 (ETA Option 1) for use on cracked concrete.
- FOR MASONRY:
- ETAG 029 approved for use in solid and hollow brick.
- FOR RETROFITTED REINFORCING BEAMS:
- ETA approval and German national approval.
- FOR SEISMIC LOADING:
- Seismic load approval according to category C1.
cordao-de-juntas-din-18540-astm-c1330
CHEMITOOL CHEMICALS Bottom Jointing Cord PE Ø6MM - 2500- As it is a PE based material it is inert product with a high resistance to chemical agents.
- Compatible with all types of sealants.
- Prevents adhesion of the sealant to the bottom of the joint, promoting proper sealant behaviour.
- Environmentally friendly: free of CFC, HCFC and chemical elements.
-100% recyclable.
- Flexible material, light and easy to install.
- Its fine cell structure and closed cells provide an excellent barrier effect and do not absorb water.
- Standard colour - grey.
- Volume: Cx with coil - 60x58x58 cm; Cx with 2m pieces: 204x41x62 cm.
- Compatible with all types of sealants.
- Prevents adhesion of the sealant to the bottom of the joint, promoting proper sealant behaviour.
- Environmentally friendly: free of CFC, HCFC and chemical elements.
-100% recyclable.
- Flexible material, light and easy to install.
- Its fine cell structure and closed cells provide an excellent barrier effect and do not absorb water.
- Standard colour - grey.
- Volume: Cx with coil - 60x58x58 cm; Cx with 2m pieces: 204x41x62 cm.
cordao-de-juntas-din-18540-astm-c1330
CHEMITOOL CHEMICALS Bottom Jointing Cord PE Ø25MM - 200- As it is a PE based material it is inert product with a high resistance to chemical agents.
- Compatible with all types of sealants.
- Prevents adhesion of the sealant to the bottom of the joint, promoting proper sealant behaviour.
- Environmentally friendly: free of CFC, HCFC and chemical elements.
-100% recyclable.
- Flexible material, light and easy to install.
- Its fine cell structure and closed cells provide an excellent barrier effect and do not absorb water.
- Standard colour - grey.
- Volume: Cx with coil - 60x58x58 cm; Cx with 2m pieces: 204x41x62 cm.
- Compatible with all types of sealants.
- Prevents adhesion of the sealant to the bottom of the joint, promoting proper sealant behaviour.
- Environmentally friendly: free of CFC, HCFC and chemical elements.
-100% recyclable.
- Flexible material, light and easy to install.
- Its fine cell structure and closed cells provide an excellent barrier effect and do not absorb water.
- Standard colour - grey.
- Volume: Cx with coil - 60x58x58 cm; Cx with 2m pieces: 204x41x62 cm.
