twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 10,00mm)- Main application Steel (N / mm²) <900 and cast iron
- Secondary application Brass and bronze
- Secondary application Brass and bronze
Sort by:
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Type N, HSS-G TiN (Ø 3,20mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 type VA, HSSE-Co 5 Ground(Ø 3 mm)- Powerful right-hand cutting high-performance drill with distinctive heat resistance.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.
case-sets
IRWIN Kit 15 Bits for Metal TURBOMAX HSS 1,5 mm a 10 mmDesigned for high performance Biting. TURBOMAX ™ Bits are designed for high performance Biting for all types of woods and plastics.Suitable for stainless steel, although the HSS Cobalt series is specifically designed for it. Stainless steel should always be usedwith refrigerant.
broca-retificada-36-hsse-co-5-ambar
RUKO Spiral Bits DIN 338 Type VA, HSSE-Co5 (Ø 7,60mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics
- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 8,50mm)- Main application Steel (N / mm²) <900 and cast iron
- Secondary application Brass and bronze
- Secondary application Brass and bronze
twist-drill-din-338-n-hss-g
BROCA CIL.HSS DIN338 4,2mm
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 1,20mm)- Main application Steel (N / mm²) <900 and cast iron
- Secondary application Brass and bronze
- Secondary application Brass and bronze
twist-drill-din-338-n-hss-g
CHEMITOOL CUTTING 151X101MM Ø12,25 DIN338 HSS-G BLACKLABEL Spiral Fully...- High Speed Steel M2;
- Fully ground;
- High drilling performance;
- Available from 1,0 to 16mm diameter;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Material: High Speed Steel M2;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
- Fully ground;
- High drilling performance;
- Available from 1,0 to 16mm diameter;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Material: High Speed Steel M2;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
twist-drill-din-340-n-hss-g
CHEMITOOL CUTTING 291X170MM Ø28 DIN345 HSS-G Morse Taper Spiral Fully Ground...- Fully ground;
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Type VA, HSSE-Co5 (Ø 8,00mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics
- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics
twist-drill-din-338-n-hss-g
DeWalt Din 338 Jobber Metal Drill Bit 12x151mm- Precision ground twist drill bit for rapid drilling, long life and excellent concentricity.
- Manufactured from High Speed Steel to DIN338.
- Ground from solid stock right hand cutting, type N flute, precision ground at 118° point angle.
- Manufactured from High Speed Steel to DIN338.
- Ground from solid stock right hand cutting, type N flute, precision ground at 118° point angle.
twist-drill-din-338-n-hss-g
BROCA CILINDRICA HSS-G TIN DIN338 6MM
twist-drill-din-340-n-hss-g
CHEMITOOL CUTTING 238X140MM Ø20 DIN345 HSS-G Morse Taper Spiral Fully Ground...- Fully ground;
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 4,2 mm)- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
twist-drill-din-338-n-hss-g
CHEMITOOL CUTTING 198X163MM Ø18,5 DIN338 HSS-G Reduced Spiral Fully Ground...- Excellent quality/value ratio;
- Fully ground;
- Reduced shank 13mm;
- Available from 13,50 to 20mm diameter;
- Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
- Fully ground;
- Reduced shank 13mm;
- Available from 13,50 to 20mm diameter;
- Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
twist-drill-din-340-n-hss-g
CHEMITOOL CUTTING 281X160MM Ø25 DIN345 HSS-G Morse Taper Spiral Fully Ground...- Fully ground;
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
twist-drill-din-338-n-hss-g
BROCA HELICOIDAL DIN 338
twist-drill-din-338-n-hss-g
IRWIN Bit HSS TITANIUM Ø11x142 mm- Split point of 135 ° rectified;
- Industrial grade rectified groove;
- High quality steel body with titanium nitride coating (TiN);
- Speed and power;
- Less heat.
- Industrial grade rectified groove;
- High quality steel body with titanium nitride coating (TiN);
- Speed and power;
- Less heat.
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 type VA, HSSE-Co 5 Ground(Ø 6 mm)- Powerful right-hand cutting high-performance drill with distinctive heat resistance.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 0,40mm)- Main application Steel (N / mm²) <900 and cast iron
- Secondary application Brass and bronze
- Secondary application Brass and bronze
twist-drill-din-338-n-hss-g
TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 9,5 mm)- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Type VA, HSSE-Co5 (Ø 2,25mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics
- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics
