Twist Drills (38)

twist-drill-din-338-n-hss-g

2155090*BROCA HSS CO 9MM

Available

twist-drill-din-338-n-hss-g

IRWIN Long Bit HSS PRO - DIN 340 Ø8x160 mm

- The series of long Bits DIN 340 is best suited for deep and hollow profile holes;
- Manufactured according to DIN 340;
- 118 ° split point;
- Enamelled silver surface.

Without stock

twist-drill-din-338-n-hss-g

TERRAX by RUKO Twist Drills DIN 338 type VA, HSSE-Co 5 Ground(Ø 6,5 mm)

- Powerful right-hand cutting high-performance drill with distinctive heat resistance.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.

Available

case-sets

IRWIN Bits Set 19 pcs. HSS COBALT - DIN 338 1 mm a 10 mm (in 0,5 mm increments)

- Split point of 135 ° rectified;
- Industrial grade rectified groove;
- Cobalt alloy Bit body;
- Finished tempered and gilded surface.

Available

broca-retificada-36-hsse-co-5-ambar

RUKO Spiral Bits DIN 338 Type VA, HSSE-Co5 (Ø 8,20mm)

- Main use Steel (N / mm²) <900 and cast iron

- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics

Available

twist-drill-din-338-n-hss-g

DeWalt Extreme Cobalt HSS-CO Drill Bit 6.5x101mm

- The 8% cobalt content maintains a sharper cutting edge and delivers a 4X longer life versus DeWalt Black Oxide bits.
- The optimised tip and flute geometry delivers 2X the penetration speed, versus DeWalt Black Oxide bits, removes material faster and reduces heat build up.
- The stronger central core delivers 2X the resistance to breakage versus DeWalt Black Oxide drill bits.

Available

twist-drill-din-338-n-hss-g

RUKO Spiral Bits DIN 338 Type VA, HSSE-Co5 (Ø 1,80mm)

- Main use Steel (N / mm²) <900 and cast iron

- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics

Available

twist-drill-din-338-n-hss-g

IRWIN Long Bits Set 10pcs. - DIN 340 Ø3x110 mm

- The series of long Bits DIN 340 is best suited for deep and hollow profile holes .;
- Manufactured according to DIN 340;
- 118 ° split point;
- Enamelled silver surface.

Available

twist-drill-din-338-n-hss-g

RUKO Spiral Bits DIN 338 Type N, HSS-G TiN (Ø 0,40mm)

- Main use Steel (N / mm²) <900 and cast iron

- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics

Available

broca-retificada-36-hsse-co-5-ambar

RUKO Spiral Bits DIN 338 Type VA, HSSE-Co5 (Ø 18,00mm)

- Main use Steel (N / mm²) <900 and cast iron

- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics

Available

twist-drill-din-338-n-hss-g

TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 13 mm)

- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.

Available

twist-drill-din-338-n-hss-g

TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 12 mm)

- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.

Without stock

twist-drill-din-338-n-hss-g

TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 10,5 mm)

- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.

Available

twist-drill-din-338-n-hss-g

TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 10 mm)

- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.

Available

twist-drill-din-338-n-hss-g

RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 4,30mm)

- Main application Steel (N / mm²) <900 and cast iron

- Secondary application Brass and bronze

Available

broca-retificada-40-hsse-co-5-polegada

BROCA TL3000 DIN 338 3/32

Available

broca-retificada-36-hsse-co-5-ambar

RUKO Spiral Bits DIN 338 Type VA, HSSE-Co5 (Ø 17,00mm)

- Main use Steel (N / mm²) <900 and cast iron

- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics

Available

twist-drill-din-338-n-hss-g

RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 9,70mm)

- Main application Steel (N / mm²) <900 and cast iron

- Secondary application Brass and bronze

Available

broca-retificada-36-hsse-co-5-ambar

RUKO Spiral Bits DIN 338 Type VA, HSSE-Co5 (Ø 5,60mm)

- Main use Steel (N / mm²) <900 and cast iron

- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics

Available

twist-drill-din-338-n-hss-g

IRWIN Bit HSS COBALT - DIN 338 Ø7,5x109 mm

- Split point of 135 ° rectified;
- Industrial grade rectified groove;
- Cobalt alloy Bit body;
- Finished tempered and gilded surface.

Available

twist-drill-din-338-n-hss-g

IRWIN Bit HSS COBALT - DIN 338 Ø5,1x86 mm

- Split point of 135 ° rectified;
- Industrial grade rectified groove;
- Cobalt alloy Bit body;
- Finished tempered and gilded surface.

Available

twist-drill-din-338-n-hss-g

RUKO Spiral Bits DIN 338 Type N, HSS-G TiN (Ø 5,00mm)

- Main use Steel (N / mm²) <900 and cast iron

- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics

Available