PFERD Cleaning Kit 7 ZG

Advantages:
- Good spray qualities.
- Good lubrication qualities.
- Low viscosity.
- Protects against corrosion.
- Highly water-resistant. (3) Gear grease FT 3 For gears on flexible shaft machines, angle drives and angle handpieces. (4) Ball bearing grease FT 5 For all ball bearings. Light moistening of grease slingers to protect them against dust. (5) Flexible shaft grease FT 4 Grease with special lubrication and adhesive properties for flexible shafts 4 ZG to 15 KG. After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated. Degrease the core and casing and reapply the special shaft grease to the core. (6) Maintenance set consists of: 1 hose brush for removing the old grease from the flexible casing. 2 non-linting cleaning cloths (400 x 330 mm) Degrease the core with a degreasing agent and a cleaning cloth (do not use cotton waste!). Apply new grease onto a second cloth andpull the core through.