- Advantages:
- Quick hardening;
- High mechanical resistance;
- Possible use at low temperatures.
- Indications: -Ampoules can be used, as long as they are intact and the resin is liquid (viscous) at room temperature.
- Installation in a wet hole doubles the hardening time.
- Applications:
- Applicable on solid supports. It does not create stress on the base material and can, therefore, be applied close to the edges.
- Instructions: 1º – Make the diameter of the hole; 2º– Clean the hole carefully with a brush or an air pump. It is not recommended to clean it with water; 3º – Insert the capsule into the hole. Make sure that the liquid inside the bulb runs when you move the bulb by hand; 4º – Install the rod into the hole using an impact drill; 5º – Observe hardening and gel times required before applying charges; 6º – Assemble the material to be fixed and tighten the nut to the correct torque.
- Ref
- CH09160125
- EAN
- 5601866276735
- Brand
- CHEMITOOL CHEMICALS
- Diameter
- 18
- Screw thread
- M16
- Cartridge
- M16X125 ML
- Shelf life
- 12 MESES
- Hole Diameter
- 18
- Hole depth
- 125
-
Safety payments
-
Worldwide shipping
-
Returns within 14 days