LIMA 4131 200 MM

cutting-tools

PFERD Coated Abrasives Short Belts Aluminium Oxide A G60 13 x 457 mm

For universal applications from coarse to fine grinding.
- Abrasive: Aluminium oxide A

Ready to Ship

lamela-de-perno-para-metal

LAMELA DE LIXA F 2010 3 A 320

Ready to Ship

disco-diamantado-segmentado-geral-obra

BELFLEX SLE General Purpose Disc 180 x 7 x 22 mm

- Diamond blade for professional use, and excellent performance.

Ready to Ship

macho-maquina-m-din-371-hss-c-35-cego

TERRAX by RUKO Machine Taps M6 DIN 371 / 376, Type C / 35º RSP, HSS

- Machine taps with reinforced shank and 35° right-hand spiral flutes for bottoming.
- Chamfer: type C / 35° right-hand spiral flutes, 2 - 3 threads.
- Thread: metric, DIN ISO 13.
- Flanks: relief-ground.

Ready to Ship

twist-drill-din-338-n-hss-g

CHEMITOOL CUTTING 75x43mm Ø4 DIN338 HSS-R Roll Forged Spiral Drill

- Excellent quality/value ratio;
- Roll forged;
- Good drilling performance;
- Available from 1,0 to 16mm diameter;
-Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.

Ready to Ship

tungsten-carbide-burr-a-cylinder-zya

PFERD High Performance PLAST Ø6x25mm ZYA Cylindrical Carbide Burr

- Suitable for GRP and CFRP with up to 40% fiber content;
- Minimizes delamination and fraying with special teeth similar to PCD cutters;
- Especially suitable for use in machines and robots;
- Very low cutting forces;
- High feed speeds and work without impacts or vibration marks, reducing tool and drive wear.

Ready to Ship

lamela-de-perno-para-metal

PFERD Mounted Flap Wheels Shank 3 mm Aluminium Oxide A G150 15 x 10 mm

- For universal applications from coarse to fine grinding.
- Abrasive: Aluminium oxide A.

Ready to Ship

disco-fibra-para-inox-menor-aquecimento

PFERD Fibre Discs Fibre Discs FS Ceramic Oxide Grain CO-COOL G120 180 mm

- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.

Ready to Ship

twist-drill-din-338-n-hss-g

RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 17,00mm)

- Main application Steel (N / mm²) <900 and cast iron

- Secondary application Brass and bronze

Ready to Ship

folha-de-lixa-metal-base-de-pano

(UN) FOLHA LIXA METAL HD 230x280 P80

Ready to Ship

lamina-para-plaina-eletrica

DeWaltPlaner blades TCT (82mm)

- Reversible TCT blades for planers (82mm).

Ready to Ship

fita-de-serra-para-metal

LENOX 8000x41x1,27 Z3/4 Classic Saw Band

- Aluminum / non-ferrous applications;
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.

Ready to Ship

sds-plus-hammer-drill-2-cutters

IRWIN Pack 10 Construction Bits SPEEDHAMMER PLUS IRWIN Ø5x160 mm

Speed. Set the pace with Speedhammer ™ Plus. With 28% greater flute capacity, the innovative design goes direct and direct. It removes dust and debris very quickly. E is particularly effective on uncured concrete due to unobstructed performance

Ready to Ship

lamela-de-perno-para-acabamento-misto

CHEMITOOL CUTTING Ø60x25x6|6×30mm A100 Mixed Shaft Mounted Flap Wheel

- High profitability;
- Excellent adaptation to contours;
- Cool grinding and low thermal load of the workpiece;
- Less vibration and noise;
- Satin finish;
- Without leaving marks;
- No tool clogging;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Aluminium Oxide A + Non-Woven (Scotch);
- Suitable for: Aluminium, Brass, Copper, Nickel, Stainless Steel (INOX) and Titanium, Ceramic, Glass and Plastic.

Ready to Ship

cutting-tools

RUKO Male To Open Combined-Bit Threads 'Long' HSS-TiN, Rectified (M8)

- Main application Steel (N / mm²) <800, steel (N / mm²) <1000, steel (N / mm²) <1200, stainless steel and brass

- Secondary application Aluminum, bronze, plastics, cast iron and titanium alloy

Ready to Ship