PFERD Combidisc Abrasive Disc Holders M SBH 75

- Main application Steel (N / mm²) <900 and cast iron

- Secondary application Brass and bronze

- Multiple tips for smooth efficient drilling.
- Large high quality carbide tips provide long drilling life.
- Finish-bright.

- 8% Co teeth (M42).
- High cutting performance.
- Uniform welding.
- Resistance to breakage.
- Long tool life.

Tree-shaped burr with radius end according to DIN 8032.

- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.

Speed. Set the pace with Speedhammer ™ Plus. With 28% greater flute capacity, the innovative design goes direct and direct. It removes dust and debris very quickly. E is particularly effective on uncured concrete due to unobstructed performance

- Excellent sharpening ability.
- Fast grinding.
- Long tool life.
- White (Use on fast steel products).
- Available from size 100 to 350mm.

ADVANTAGES
- Full tungsten head;
- Professional welding;
- High material removal capability;
- Available from 3 to 16mm diameter;
- Length from 33 to 163mm;
- Resistance to breakage;
- Long tool life.
The CHEMITOOL rotary tungsten carbide burr consists of a fully tungsten-formed solid head, specially prepared for removing, levelling and working on welding seams. Mainly intended for rapid material removal, this feature helps the operator to shorten the usage time and save energy.
The tungsten carbide burr has three types of cutters based on DIN8033 standard, cross cut (universal use), single cut (use for finishing) and spaced single cut (aluminum use).

The cylindrical shape ZY is ideal for grinding bores, radii and contours.

- Designed to include a wide range of hole diameters as well as drilling depths to cover the maximum of application requirements for the professional user.
- Non slip shank gives better bit retention in chuck.
- 2 x sharp cutting edges for extremely fast drilling into wood.
- Aggressive self feed spur for rapid penetration into material.

- Main application Steel (N / mm²) <800, aluminum, brass and plastics

- Secondary application Bronze and cast iron

Tree-shaped burr with radius end according to DIN 8032 with cut conforming to DIN 8033.