PFERD Abrasive Bands Aluminium Oxide A Cylindrical G150 15 x 30 mm

mo-ceramica-aco-dureza-50-hrc-cinza

BELFLEX Ceramic Wheel Gray Corundum G60 125 x 13 mm

- General purpose for grinding and sharpening applications in steel and tools lower than 50 Hrc. hardeness.

Available

core-drill-hss-3-4-cbn-weldon

TERRAX by RUKO Core drills HSS with weldon shank (3/4'), cutting depth 30,0...

- The 3-edged geometry with spiral grooves allows for extremely high stability of the Solid 3 drill bit and thus prevents the danger of edging due to excessive overloading or jamming of the chips.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.

Available

broca-cilindrica-helicoidal-centrar

DeWalt Brad Point Wood Drill Bit 14x160mm

- Manufactured from chrome vanadium alloyed steel.
- Centre location point and outer cutting spurs for clean accurate holes.
- Diameters 11mm and above the shank is reduced to 9.5 mm.

Available

brocas-sds-plus-com-4-cortantes

DeWALT XLR SDS PLUS Drill Bit with Carbide Head 5x160x100mm

- Suitable for drilling dowel holes and anchoring in masonry, all types of stone and concrete.

Available

cutting-tools

PFERD Abrasive Bands Aluminium Oxide A Cylindrical G60 25 x 25 mm

- For universal applications from coarse to fine grinding.
- Abrasive: Aluminium oxide A.

Available

twist-drill-din-338-n-hss-g

RUKO Spiral Bits DIN 338 Type VA, HSSE-Co5 (Ø 1,80mm)

- Main use Steel (N / mm²) <900 and cast iron

- Secondary use Steel (N / mm²) <1100, stainless steel, aluminum, brass, bronze, plastics

Available

disco-pastilhado-multi-material

CHEMITOOL CUTTING Ø305X30 Z96 Tungsten Carbide Tipped Saw Blade Multimaterial...

- Excellent quality/value ratio.
- Tungsten carbide teeth.
- High cutting performance.
- Great stability and work safety.
- Resistance to breakage.
- Low vibration.
- Long tool lifetime.

Available

cutting-tools

RODA ACABAMENTO PNG-W 100100 A 280

Available

lamela-de-nucleo-para-inox

PFERD CO-COOL Grinding Disc Ø165x30mm

- Optimal contour adaptation due to high flexibility;
- Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released;
- Front-side use very close to edges and at angles possible thanks to a special clamping system.

Available

countersinkers

DEWALT 3mm Pilot Drill Bit

- Flip & Drive holder for bits and countersinks;
- Continuous drilling, countersinking, and screwdriving;
- Quick flip, no retightening needed.

Available

mo-ceramica-aco-dureza-50-hrc-cinza

M.PLANA 250X20 C.N. A-60

- General purpose for grinding and sharpening applications in steel and tools lower than 50 Hrc. hardeness.

Available

bi-metal-hss-hole-saw

DEWALT POWER-TOOLS Cranean Bi-metal Crown 29mm

With a double-tooth design for long life and extreme durability, DEWALT Bi-Metal Hole Saws power through 2 times the material in a single pass. A sharp tooth geometry expedites cutting, and thick, hardened backing plates helps to prevent thread stripping. A high-speed steel height makes them ideal for tough jobs.

Available

fita-de-serra-para-metal

LENOX 3370x27x0,9 Z6/8 Classic Saw Band

- Aluminum / non-ferrous applications;
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.

Available

aco-38-hrc-uso-geral

MO MONTADA ZY1320 6ADW 80 M 5V

Available

lamela-de-perno-para-acabamento-misto

CHEMITOOL CUTTING Ø60x50x6|6×30mm A180 Mixed Shaft Mounted Flap Wheel

- High profitability;
- Excellent adaptation to contours;
- Cool grinding and low thermal load of the workpiece;
- Less vibration and noise;
- Satin finish;
- Without leaving marks;
- No tool clogging;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Aluminium Oxide A + Non-Woven (Scotch);
- Suitable for: Aluminium, Brass, Copper, Nickel, Stainless Steel (INOX) and Titanium, Ceramic, Glass and Plastic.

Available