mo-ceramica-aco-dureza-50-hrc-branca
M.PLANA 200X20 C.B. A-60- Suitable for sharpening and grounding in steels over 50 Hrc;
- Hardeness.
- Hardeness.
PFERD Abrasive Spiral Bands Zirconia Alumina Z-COOL G50 30 x 30 mm
Ready to Ship
4007220148235
- For coarse grinding work with a high stock removal rate and cool grinding.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Zirconia alumina Z-COOL.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Zirconia alumina Z-COOL.
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 4007220148235 | |||||||||
PFERD Abrasive Spiral Bands Zirconia Alumina Z-COOL G50 30 x 30 mm |
|||||||||
|
Description- For coarse grinding work with a high stock removal rate and cool grinding. |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
acessories
CHEMITOOL CUTTING Arbor with 5/8'x18 Ø11mm Hexagonal Pilot Drill to adapt to...- Great quality/value ratio;
- Available in HSS;
- Two types of thread;
- Break resistant;
- Easy fit to hole saw;
- Long tool life;
- Body: Steel;
- Suitable for: Hole saws;
- Compatible machine: Drill machine without percussion.
- Available in HSS;
- Two types of thread;
- Break resistant;
- Easy fit to hole saw;
- Long tool life;
- Body: Steel;
- Suitable for: Hole saws;
- Compatible machine: Drill machine without percussion.
broca-cilindrica-helicoidal-centrar
DeWalt Brad Point Wood Drill Bit 10x133mm- Manufactured from chrome vanadium alloyed steel.
- Centre location point and outer cutting spurs for clean accurate holes.
- Diameters 11mm and above the shank is reduced to 9.5 mm.
- Centre location point and outer cutting spurs for clean accurate holes.
- Diameters 11mm and above the shank is reduced to 9.5 mm.
broca-retificada-36-hsse-co-5-polegada
BROCA HSS Cº 1/2
carbide-cutting-straight-shank-drill
CHEMITOOL CUTTING Ø14X400MM C2 POWER Masonry Drill- Optimum quality/value ratio;
- Tungsten carbide head;
- 2 cutters;
- Excellent drilling performance;
- Available from diameter 3,0 to 20m;
- Long tool life;
- Head: Tungsten carbide;
- Suitable for: Concrete, brick, wood, aluminum, and natural stone;
- Compatible machine: Portable percussion drill machine.
- Tungsten carbide head;
- 2 cutters;
- Excellent drilling performance;
- Available from diameter 3,0 to 20m;
- Long tool life;
- Head: Tungsten carbide;
- Suitable for: Concrete, brick, wood, aluminum, and natural stone;
- Compatible machine: Portable percussion drill machine.
lamela-de-nucleo-para-metal
PFERD Unmounted Flap Wheels Aluminium Oxide A G320 165 x 50 mm- For universal applications from coarse to fine grinding.
- Abrasive: Aluminium oxide A.
- Matching tool drives: flexible shaft drive, straight grinder.
- Abrasive: Aluminium oxide A.
- Matching tool drives: flexible shaft drive, straight grinder.
lamela-de-perno-scotch-sem-marcas
PFERD Non-Woven Tools, Polinox Mounted Grindind Wheels - SiliCon Carbide...- Made of several very wavily arranged strips of non-woven abrasive material, wound around a core.
- The wavy structure of the non-woven abrasive material permits seamless brush matting of surfaces.
- The wavy structure of the non-woven abrasive material permits seamless brush matting of surfaces.
disco-de-rebarbar-metal
PFERD CC-GRIND VIEW Grinding Wheel 125x22,23 mm PSF STEELOX- Fast work progress with aggressive performance;
- Robust glass-fibre-reinforced plastic backing pad;
- Ergonomic design with reduced noise, vibrations, and dust;
- Achieves flat surfaces, unlike flap discs;
- More durable than fibre discs, even in extreme conditions;
- No special clamping flange set needed.
- Robust glass-fibre-reinforced plastic backing pad;
- Ergonomic design with reduced noise, vibrations, and dust;
- Achieves flat surfaces, unlike flap discs;
- More durable than fibre discs, even in extreme conditions;
- No special clamping flange set needed.
twist-drill-din-338-n-hss-g
CHEMITOOL CUTTING 40x18mm Ø1,5 DIN338 HSS-R Roll Forged Spiral Drill- Excellent quality/value ratio;
- Roll forged;
- Good drilling performance;
- Available from 1,0 to 16mm diameter;
-Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
- Roll forged;
- Good drilling performance;
- Available from 1,0 to 16mm diameter;
-Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
hand-tap-mf-din-2181-hss
CHEMITOOL CUTTING Hand Taps Set Metric Fine M20 - DIN2181- Great quality/value ratio;
- Easy to use;
- 2-piece game;
- Fully rectified;
- Resistant to breakage;
- Thread: M20.
- Easy to use;
- 2-piece game;
- Fully rectified;
- Resistant to breakage;
- Thread: M20.
twist-drill-din-340-n-hss-g
RUKO Spiral Bits DIN 345 - Cone Morse Nº2 HSS (Ø15,50mm)- Main application Steel (N / mm²) <900 and cast iron
- Secondary application Brass and bronze
- Secondary application Brass and bronze
wood-twist-drill-chrome-vanadium
CHEMITOOL CUTTING 230x115MM Ø18 Auger Drill Bit for Wood- Great quality/value ratio;
- Good drilling performance;
- Available from diameter 6.0 to 32mm;
- Excellent centering capacity;
- Ideal for crossing;
- Breakage resistance;
- Long tool life;
- Material: Carbon steel;
- Suitable for: Wood, wood composites;
- Compatible machine: Rotary drill machine.
- Good drilling performance;
- Available from diameter 6.0 to 32mm;
- Excellent centering capacity;
- Ideal for crossing;
- Breakage resistance;
- Long tool life;
- Material: Carbon steel;
- Suitable for: Wood, wood composites;
- Compatible machine: Rotary drill machine.
twist-drill-din-338-n-hss-g
CHEMITOOL CUTTING 79X37MM Ø8 DIN1897 HSS-G Extra Short Spiral Fully Ground...- Excellent quality/value ratio;
- Fully ground;
- Extra short body;
- Available from 2,0 to 10mm diameter;
- Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
- Fully ground;
- Extra short body;
- Available from 2,0 to 10mm diameter;
- Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
sds-plus-hammer-drill-2-cutters
BROCA SDS 22X300
fita-de-serra-para-metal
LENOX 2110x19x0,9 Z6/10 Classic Saw Band- Aluminum / non-ferrous applications;
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.