tungsten-carbide-burr-g-tree-spg
FRESA TUNGS. SPG 0618/6 Z5Pointed tree-shaped burr according to DIN 8032 with cut conforming to DIN 8033, flattened tip
PFERD Combidisc Abrasive Discs Silicon Carbide SiC CD G240 50 mm
Available
4007220441213
- For universal grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics.
- Particularly recommended for use on titanium alloys.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Abrasive: Silicon carbide SiC.
- Particularly recommended for use on titanium alloys.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Abrasive: Silicon carbide SiC.
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 4007220441213 | |||||||
PFERD Combidisc Abrasive Discs Silicon Carbide SiC CD G240 50 mm |
|||||||
|
Description- For universal grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics. |
||||||
PRODUCTS DATA
|
|||||||
SPECIFICATIONS
|
|||||||
16 other products in the same category:
brocas-sds-plus-com-4-cortantes
CHEMITOOL CUTTING Ø20X210MM SDS-PLUS Hammer Drill Bit - CX4 Performance- Excellent quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 4,0 to 26mm diameter;
- Long tool life;
- Head: 4 tungsten carbide cutters;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Lightweight electro-pneumatic portable hammer.
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 4,0 to 26mm diameter;
- Long tool life;
- Head: 4 tungsten carbide cutters;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Lightweight electro-pneumatic portable hammer.
sharpening-stone
PFERD CARBIDE 25x13x150mm SiC320 Polishing Stone Square- Long tool life.
- High dimensional stability.
- High abrasive performance.
- Even stock removal.
- Fine surface finish.
- High dimensional stability.
- High abrasive performance.
- Even stock removal.
- Fine surface finish.
brocas-sds-plus-com-4-cortantes
CHEMITOOL CUTTING Ø18X310MM SDS-PLUS Hammer Drill Bit - CX4 Performance- Excellent quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 4,0 to 26mm diameter;
- Long tool life;
- Head: 4 tungsten carbide cutters;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Lightweight electro-pneumatic portable hammer.
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 4,0 to 26mm diameter;
- Long tool life;
- Head: 4 tungsten carbide cutters;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Lightweight electro-pneumatic portable hammer.
disco-fibra-para-inox-menor-aquecimento
PFERD Fibre Discs Fibre Discs FS Ceramic Oxide Grain CO-COOL G120 125 mm- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
lamela-de-perno-para-metal
PFERD Mounted Flap Wheels Shank 3 mm Aluminium Oxide A G240 30 x 5 mm- For universal applications from coarse to fine grinding.
- Abrasive: Aluminium oxide A.
- Abrasive: Aluminium oxide A.
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 6,80mm)- Main application Steel (N / mm²) <900 and cast iron
- Secondary application Brass and bronze
- Secondary application Brass and bronze
cinta-de-lixa-scotch-grao-medio
CINTA NÃO-TECIDO PROWEB TT 55X940 MED
twist-drill-din-340-n-hss-g
RUKO Spiral Bits DIN 345 - Cone Morse Nº4 HSS (Ø34,50mm)- Main application Steel (N / mm²) <900 and cast iron
- Secondary application Brass and bronze
- Secondary application Brass and bronze
broca-escalonada-3f-hss-2-gumes
BROCA CONICA 0-5
twist-drill-din-340-n-hss-g
CHEMITOOL CUTTING 253X155MM Ø23 DIN345 HSS-G Morse Taper Spiral Fully Ground...- Fully ground;
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
- High drilling performance;
- Available from diameter 16,0 to 40mm;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Morse taper shank (size 2 to 4);
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Bench drill machine.
fita-de-serra-para-metal
LENOX 2080x19x0,9 Z10/14 Classic Saw Band- Aluminum / non-ferrous applications;
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.
- Tool steels, alloy steels, carbon steels and stainless steels. As with structural steels.
aco-38-hrc-desbaste-de-bordo
MO MONTADA B124 3 AR 100 O 5 V
disco-de-rebarbar-inox
PFERD Grinding Wheels Universal Line PSF Steelox E 178-4,6 A 24 M...- Grinding wheel for steel and stainless steel (INOX) with high grinding performance and long tool life.
- Materials that can be worked: steel, stainless steel (INOX).
- Applications: surface grinding, weld dressing, work on fillet welds, grouting, chamfering, deburring.
- Abrasive: Aluminium oxide A.
- Recommendations for use: Widths of 4.1 and 4.6 mm are ideal for work on root seams.
- Materials that can be worked: steel, stainless steel (INOX).
- Applications: surface grinding, weld dressing, work on fillet welds, grouting, chamfering, deburring.
- Abrasive: Aluminium oxide A.
- Recommendations for use: Widths of 4.1 and 4.6 mm are ideal for work on root seams.
fita-de-serra-para-metal
CHEMITOOL CUTTING Band Saw Blade POWER PRO 6000X41X1,3 Z5/7P- 8% Co teeth (M42);
- High cutting performance;
- Width from 13 to 67mm;
- Thickness from 0,6 to 1,6mm;
- Uniform welding;
- Resistance to breakage;
- Long tool life.
- High cutting performance;
- Width from 13 to 67mm;
- Thickness from 0,6 to 1,6mm;
- Uniform welding;
- Resistance to breakage;
- Long tool life.
twist-drill-din-338-n-hss-g
RUKO Twist Drill 10,8mm DIN 338 type N, HSS RolledHigh-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity.
Thanks to the split point, this drill has good centring properties and requires little pressure.
Thanks to the split point, this drill has good centring properties and requires little pressure.