PFERD Combidisc Abrasive Discs Silicon Carbide SiC CD G240 75 mm
Available
4007220441268
- For universal grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics.
- Particularly recommended for use on titanium alloys.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Abrasive: Silicon carbide SiC.
- Particularly recommended for use on titanium alloys.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Abrasive: Silicon carbide SiC.
Add to cart
40,00 €
and shipping is free
|
|||||||
|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 4007220441268 | |||||||
PFERD Combidisc Abrasive Discs Silicon Carbide SiC CD G240 75 mm |
|||||||
|
Description- For universal grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics. |
||||||
PRODUCTS DATA
|
|||||||
SPECIFICATIONS
|
|||||||
16 other products in the same category:
sharpening-stone
PFERD CARBIDE 13x3x150mm SiC600 Polishing Stone Square- Long tool life.
- High dimensional stability.
- High abrasive performance.
- Even stock removal.
- Fine surface finish.
- High dimensional stability.
- High abrasive performance.
- Even stock removal.
- Fine surface finish.
countersinker-din-335-c-90-hss
Taper And Deburring Countersinks DIN 335 Type C 90º HSS-TiAIN (Ø10,4mm) RUKO
disco-de-corte-pedra
BELFLEX Stone Cutting Disc 230 x 3 x 22 mm- Abrasives discs in silicon carbide, with resins joint for cutting in stone and non-ferric materials.
cutting-tools
PFERD Abrasive Spiral Bands Zirconia Alumina Z Cylindrical G80 38 x 25 mm- For coarse grinding work with a high stock removal rate and a long tool life.
- Abrasive: Zirconia alumina Z.
- Abrasive: Zirconia alumina Z.
twist-drill-din-340-n-hss-g
RUKO Spiral Bits DIN 345 - Cone Morse Nº2 HSSE-Co5 TiN (Ø14,50mm)- Main use Steel (N / mm ²) <900 and steel (N / mm ²) <1100
- Secondary use Stainless steel, aluminum, brass, bronze, plastics, cast iron and alloy titanium
- Secondary use Stainless steel, aluminum, brass, bronze, plastics, cast iron and alloy titanium
disco-de-lamelas-para-ligas-exoticas
CHEMITOOL CUTTING Ø125x22mm C60 Ceramic Oxide Crain Flap Disc- High performance;
- Aggressive thinning;
- Fast cooling;
- Stability during the polishing process;
- Little vibration;
- Multi-materials;
- Long tool life;
- Suitable for: Stainless Steel (INOX), Nickel-Based Alloys (e.g. Inconel and Hastelloy), Hard Aluminium Alloys;
- Abrasive: Ceramic Grain;
- Suitable Machines: Straight and Angular Grinders.
- Aggressive thinning;
- Fast cooling;
- Stability during the polishing process;
- Little vibration;
- Multi-materials;
- Long tool life;
- Suitable for: Stainless Steel (INOX), Nickel-Based Alloys (e.g. Inconel and Hastelloy), Hard Aluminium Alloys;
- Abrasive: Ceramic Grain;
- Suitable Machines: Straight and Angular Grinders.
broca-de-chanfrar-longa-90-fino
BROCA ESCALONADA LONGA
hand-tap-m-din-352-hss
RUKO Hand Tap M DIN 352 HSS (Ø 8,50 mm)
tungsten-carbide-burr-g-tree-spg
FRESA TUNGS. SPG 0613/3 Z5Pointed tree-shaped burr according to DIN 8032 with cut conforming to DIN 8033, flattened tip
coroas-diamantadas-com-agua
DEWALT POWER-TOOLS Wet Diamond Core Bit Ø250 L=400mm sec.Wet Diamond Core Bit 1 1/4 Unc - 250 X 400mm.
cutting-tools
PFERD Abrasive Spiral Bands Ceramic Oxide Grain CO-COOL Cylindrical G36 30 x...- For aggressive grinding with maximum stock removal rate on hard and tough materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.
fita-de-serra-para-metal
CHEMITOOL CUTTING Band Saw Blade POWER PRO 3010x27x0,9mm Z8/11P- 8% Co teeth (M42);
- High cutting performance;
- Width from 13 to 67mm;
- Thickness from 0,6 to 1,6mm;
- Uniform welding;
- Resistance to breakage;
- Long tool life.
- High cutting performance;
- Width from 13 to 67mm;
- Thickness from 0,6 to 1,6mm;
- Uniform welding;
- Resistance to breakage;
- Long tool life.
lamela-de-perno-para-inox
BELFLEX Shaft-Mounted Flap Wheels A-60 30 x 30 x 6 mm- Suitable for fine grinding and polishing in steel surfaces and edges, steel and stain-less plates
twist-drill-din-338-n-hss-g
BROCA HELICOIDAL DIN 338 TYP VA
twist-drill-din-338-n-hss-g
RUKO Spiral Bits DIN 338 Type N, HSS-G Flat (Ø 4,25mm)- Main use Steel (N / mm²) <900 and cast iron
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics
- Secondary use Steel (N / mm ²) <1100, Stainless steel, Aluminum, Brass, Bronze, Plastics