PFERD Combidisc Abrasive Discs Silicon Carbide SiC CDR G240 50 mm
Ready to Ship
4007220778517
- For universal grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics.
- Particularly recommended for use on titanium alloys.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Abrasive: Silicon carbide SiC.
- Particularly recommended for use on titanium alloys.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Abrasive: Silicon carbide SiC.
Add to cart
40,00 €
and shipping is free
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| Datasheet \ Reference 4007220778517 | |||||||||
PFERD Combidisc Abrasive Discs Silicon Carbide SiC CDR G240 50 mm |
|||||||||
|
Description- For universal grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics. |
||||||||
PRODUCTS DATA
|
|||||||||
SPECIFICATIONS
|
|||||||||
16 other products in the same category:
aco-38-hrc-desbaste-de-bordo
MO MONTADA KU 10 6AR 80 O 5V
twist-drill-din-338-n-hss-g
IRWIN TCT Bit HSS PRO - DIN 338 Ø9x125 mm- Rectified four-sided hard metal tip;
- Super deep double groove;
- Reduced groove;
- Vanadium chrome steel body;
- The coolant should always be used.
- Super deep double groove;
- Reduced groove;
- Vanadium chrome steel body;
- The coolant should always be used.
lamela-de-perno-para-inox
BELFLEX Shaft-Mounted Flap Wheels A-60 30 x 15 x 6 mm- Suitable for fine grinding and polishing in steel surfaces and edges, steel and stain-less plates
cutting-tools
PFERD Combidisc Abrasive Discs Aluminium Oxide A-Plus CD G36 50 mm- For universal applications from coarse to fine grinding.
- Higher stock removal rate due to sturdy backing material.
- Particularly for use in edge grinding due to high tear strength.
- Abrasive: Aluminium oxide A-PLUS.
- Higher stock removal rate due to sturdy backing material.
- Particularly for use in edge grinding due to high tear strength.
- Abrasive: Aluminium oxide A-PLUS.
disco-pastilhado-construcao
CHEMITOOL CUTTING Tungsten Carbide Tipped Saw Blade Construction Ø235X30 Z24- Excellent quality/value ratio.
- Tungsten carbide teeth.
- High cutting performance.
- Great stability and work safety.
- Resistance to breakage.
- Low vibration.
- Long tool lifetime.
- Tungsten carbide teeth.
- High cutting performance.
- Great stability and work safety.
- Resistance to breakage.
- Low vibration.
- Long tool lifetime.
desandador-de-machos-regulavel-din-1814
RUKO Adjustable Tap Wrench As Per DIN 1814 Size 1 (L 175,0 mm)
twist-drill-din-338-n-hss-g
CHEMITOOL CUTTING 49x24mm Ø2 DIN338 HSS-R Roll Forged Spiral Drill- Excellent quality/value ratio;
- Roll forged;
- Good drilling performance;
- Available from 1,0 to 16mm diameter;
-Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
- Roll forged;
- Good drilling performance;
- Available from 1,0 to 16mm diameter;
-Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.
sds-plus-hammer-drill-2-cutters
IRWIN Construction Bit SPEEDHAMMER PLUS IRWIN Ø24x260 mmSpeed. Set the pace with Speedhammer ™ Plus. With 28% greater flute capacity, the innovative design goes direct and direct. It removes dust and debris very quickly. E is particularly effective on uncured concrete due to unobstructed performance
aco-38-hrc-desbaste-de-bordo
MO MONTADA KU 08 3AR 46 O 5V
fita-de-serra-para-metal
CHEMITOOL CUTTING 4800mm Bandsaw Z5/8- 8% Co teeth (M42).
- High cutting performance.
- Available from 1310 to 6000mm diameter.
- Height from 13 to 34mm.
- Resistance to breakage.
- Long tool life.
- High cutting performance.
- Available from 1310 to 6000mm diameter.
- Height from 13 to 34mm.
- Resistance to breakage.
- Long tool life.
lamela-de-nucleo-para-metal
PFERD Unmounted Flap Wheels Aluminium Oxide A G150 165 x 30 mm- For universal applications from coarse to fine grinding.
- Abrasive: Aluminium oxide A.
- Matching tool drives: flexible shaft drive, straight grinder.
- Abrasive: Aluminium oxide A.
- Matching tool drives: flexible shaft drive, straight grinder.
sds-plus-hammer-drill-2-cutters
IRWIN Construction Bit SPEEDHAMMER PLUS IRWIN Ø12x160 mmSpeed. Set the pace with Speedhammer ™ Plus. With 28% greater flute capacity, the innovative design goes direct and direct. It removes dust and debris very quickly. E is particularly effective on uncured concrete due to unobstructed performance
lamela-de-perno-para-inox
CHEMITOOL CUTTING Ø30x20x6|6x40mm Z60 Zirconia Alumina Z Shaft Mounted Flap...- Less vibration and noise;
- Flexibility;
- Excellent adaptation to contours;
- Coarse grinding;
- High material removal;
- Aggressive abrasive;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Zirconia Alumina Z;
- Suitable for: Steel, Cast Steel, Cast Iron.
- Flexibility;
- Excellent adaptation to contours;
- Coarse grinding;
- High material removal;
- Aggressive abrasive;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Zirconia Alumina Z;
- Suitable for: Steel, Cast Steel, Cast Iron.
aco-38-hrc-uso-geral
MO MONTADA KE1025 6ADW 80 M 5V
cutting-tools
PFERD Combidisc Abrasive Discs Aluminium Oxide A-Plus CDR G36 75 mm- For universal applications from coarse to fine grinding.
- Higher stock removal rate due to sturdy backing material.
- Particularly for use in edge grinding due to high tear strength.
- Abrasive: Aluminium oxide A-PLUS.
- Higher stock removal rate due to sturdy backing material.
- Particularly for use in edge grinding due to high tear strength.
- Abrasive: Aluminium oxide A-PLUS.