RUKO Seat Support Including Center Bits for HSSE-CO 8 Bimetallic Cranial Saws (Ø14,0 - 30,0mm)

sds-plus-hammer-drill-3-cutters

BROCA SDS PLUS 10X110

Available

twist-drill-din-338-n-hss-g

TERRAX by RUKO Twist Drills DIN 338 type VA, HSSE-Co 5 Ground (Ø 1 mm)

- Powerful right-hand cutting high-performance drill with distinctive heat resistance.
- Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel.

Available

fita-de-serra-para-metal

CHEMITOOL CUTTING 2720mm Bandsaw Z10/14

Available

bi-metal-hss-hole-saw

DeWalt Holesaw Bim 152mm

- Double tooth design provides Improved tooth strength and longer durability.
- Staggered side slots for easier plug removal.

Available

laminas-para-madeira

SERRA TICO-TICO (5P)

Available

fita-de-serra-para-metal

CHEMITOOL CUTTING 2450mm Bandsaw Z10/14

- 8% Co teeth (M42).
- High cutting performance.
- Available from 1310 to 6000mm diameter.
- Height from 13 to 34mm.
- Resistance to breakage.
- Long tool life.

Available

sds-plus-hammer-drill-2-cutters

Brocas SDS-Plus ø 6x110mm. comp. Útil

Available

lamela-de-perno-para-metais-duros

PFERD Mounted Flap Wheels Shank 6 x 40 mm Ceramic Oxide Grain CO-COOL G80 30...

- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.

Available

grosa-para-madeira-retangular

CHEMITOOL CUTTING 150x16mm Coarse Cut Parallel Carpentry Rasp File with...

- Bi-material handle (ergonomic and non-slip);
- High profitability;
- Long tool life.

Available

broca-cilindrica-helicoidal-centrar

DeWalt Wood Auger Drill Bit 24x200mm

- Threaded centre point to aid accurate drilling.
- Outer cutting spur provides clean holes with less splintering.
- Special Lewis spiral flute allows for fast removal of debris and rapid drilling.

Available

twist-drill-din-338-n-hss-g

TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 8 mm)

- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.

Available

cutting-tools

BROCA DE PEDRA 25 MM

Available

disco-de-fibra-para-inox

PFERD Fibre Discs Fibre Discs FS Aluminium Oxide A-COOL G180 115 mm

- For universal grinding work from fine to very fine grinding on materials which do not conduct heat well, e.g. stainless steel (INOX).
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Aluminium oxide A-COOL.

Available

lamela-de-nucleo-para-metal

CHEMITOOL CUTTING Ø250x44/50mm A120 Aluminium Oxide A Flap Wheel

- Flexibility;
- Excellent adaptation to the workpiece edges;
- Highly resistant;
- Long tool life;
- Abrasive: Aluminium Oxide A;
- Suitable for: Steel, Cast Steel, Cast Iron;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders and Bench Grinders.

Available

prato-de-apoio-em-borracha-rigida

CHEMITOOL Fibre disc pad Ø 125 mm M14

CHEMITOOL Fibre Disc Pad is made to support fibre discs during sanding, grinding and finishing processes.

Available