RUKO Runner M DIN EN 22568 HSS - Cut To Right, Rectified (M12)

lamela-de-nucleo-para-metal

CHEMITOOL CUTTING Ø200x44/30mm A80 Aluminium Oxide A Flap Wheel

- Flexibility;
- Excellent adaptation to the workpiece edges;
- Highly resistant;
- Long tool life;
- Abrasive: Aluminium Oxide A;
- Suitable for: Steel, Cast Steel, Cast Iron;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders and Bench Grinders.

Ready to Ship

mo-ceramica-aco-dureza-50-hrc-branca

M.PLANA 175X20 C.B. A-60

- Suitable for sharpening and grounding in steels over 50 Hrc;
- Hardeness.

Ready to Ship

tungsten-carbide-burr-g-tree-spg

FRESA TUNGS. SPG 0618/6 Z3P

Pointed tree-shaped burr according to DIN 8032 with cut conforming to DIN 8033, flattened tip

Ready to Ship

twist-drill-din-338-n-hss-g

RUKO Spiral Bits DIN 340 Tipo N, HSS-G (Ø 10,00mm)

- Main use Steel (N / mm ²) <900, Steel (N / mm ²) <1100

- Secondary use Steel (N / mm ²) <1300, aluminum, brass, bronze, synthetic materials and cast iron

Ready to Ship

fita-de-serra-para-metal

CHEMITOOL CUTTING 2720mm Bandsaw Z6/10

- 8% Co teeth (M42).
- High cutting performance.
- Available from 1310 to 6000mm diameter.
- Height from 13 to 34mm.
- Resistance to breakage.
- Long tool life.

Ready to Ship

folha-de-lixa-industria

CHEMITOOL PROWET SPEED 230x280mm G280 Waterproof Sanding Sheet Industry

- Great quality/value ratio;
- Easy to use;
- Format 230x280mm;
- Absorbs water;
- General use;
- Tear-resistant.

Ready to Ship

disco-diamantado-segmentado-asfalto

CHEMITOOL CUTTING Ø300x25,4mm OSA BLACKLABEL Flat Asphalt Segmented Diamond...

- OSA Certification;
- 12mm segment height;
- Laser welding;
- High cutting performance;
- Great stability and job safety;
- Resistance to breakage;
- Low vibration;
- Long tool lifetime;
- Abrasive: Professional diamond grain;
- Suitable for: Asphalt and concrete;
- Compatible machine: Floor Saw.

Ready to Ship

profundidade-de-corte-30mm

CHEMITOOL CUTTING Ø32 PC=30MM Annular Cutter for Magnetic Drill Machine

- Fully ground;
- High drilling performance;
- Available from diameter 12 to 50mm;
- Drill length 30mm (short series);
- Breakage resistance;
- Long tool life;
- 3/4″ Weldon shank;
- Material: High-speed steel M2;
- Suitable for: Steel, aluminium and non-ferrous metals;
- Compatible machine: Magnetic Column Drill Machine.

Ready to Ship

core-drill-hss-3-4-cbn-weldon

TERRAX by RUKO Core drills HSS with weldon shank (3/4'), cutting depth 30,0...

- The 3-edged geometry with spiral grooves allows for extremely high stability of the Solid 3 drill bit and thus prevents the danger of edging due to excessive overloading or jamming of the chips.
- Due to the high stability the life of the Solid 3 is visibly increased. This reduces costs.
- Solid 3 allows drilling without the need to mark the hole, without the need to be centered and not traced.
- Solid 3 is easier to polish later than cranial drills of the same diameter.

Ready to Ship

cutting-tools

PFERD Combidisc Abrasive Discs Ceramic Oxide Grain CO-COOL CDR G60 75 mm

- For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.

Ready to Ship

sds-plus-hammer-drill-2-cutters

IRWIN Pack 5 Construction Bits SPEEDHAMMER PLUS IRWIN Ø6x160 mm

Speed. Set the pace with Speedhammer ™ Plus. With 28% greater flute capacity, the innovative design goes direct and direct. It removes dust and debris very quickly. E is particularly effective on uncured concrete due to unobstructed performance

Ready to Ship

lamela-de-perno-para-metal

CHEMITOOL CUTTING Ø80x40x6|6×30mm A60 Alu-Oxide Shaft Mounted Flap Wheel

- Less vibration and noise;
- Flexibility;
- Excellent adaptation to contours;
- Finer finish;
- High material removal;
- Aggressive abrasive;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Aluminium Oxide A;
- Suitable for: Steel, Cast Steel, Cast Iron.

Ready to Ship

twist-drill-din-338-n-hss-g

CHEMITOOL CUTTING 151X101MM Ø12 DIN338 HSSE-G 5% Cobalt Spiral Fully Ground...

- 5% Cobalt M35;
- Fully ground;
- Ambar finishing;
- Premium performance in stainless steel;
- Available from 1,0 to 13mm diameter;
- Excellent centering capability;
- Resistance to breakage;
- Long tool life;
- Material: High speed steel with 5% cobalt;
- Suitable for: Stainless steel, steel, aluminum, and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.

Ready to Ship

carbide-cutting-straight-shank-drill

BROCA 16X160mm

Ready to Ship

fita-de-serra-para-metal

CHEMITOOL CUTTING 3100mm Bandsaw Z6/10

- 8% Co teeth (M42).
- High cutting performance.
- Available from 1310 to 6000mm diameter.
- Height from 13 to 34mm.
- Resistance to breakage.
- Long tool life.

Ready to Ship