JOGO DE ESCARIADORE F

twist-drill-din-338-n-hss-g

RUKO Set Of 19 Spiral Bits DIN 338 Type N, HSS-G Flat

- Set of 19 spiral drill bits DIN 338 type N Ø 1,0 mm up to 10,0 mm x 0,5 mm upwards in polystyrene box

Available

cutting-tools

PFERD Combidisc Abrasive Discs Silicon Carbide SiC CDR G120 50 mm

- For universal grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics.
- Particularly recommended for use on titanium alloys.
- Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components.
- Abrasive: Silicon carbide SiC.

Available

lima-quadrada

PFERD Files Square DIN Series (without Handle) for Universal Use 250 mm

- Square file, tapered and cut on four sides.
- Version with tang.
- Shape D according to DIN 7261.
- Suitable for filing angular profiles.

Available

ponta-de-feltro-forma-cilindrica-zya

MO FELTRO FK ZYA 0810/3

The cylindrical shape ZYA is mainly used peripherally;
-The variant with end hole (ST-BO) is particularly suitable for face-down use;
-Felt points with metal inserts (MS) are used for increased stock removal when pre-polishing with diamond polishing pastes.

Available

mo-ceramica-aco-dureza-50-hrc-cinza

CHEMITOOL CUTTING Ø200x32/32mm G80 Ceramic Grinding Wheel Grey

- Excellent sharpening capacity.
- Fast grinding.
- Long tool life.
- Grey (Universal use).
- Available from size 100 to 350mm.

Available

cutting-tools

EST.MACHOS+CACON.M3-12

Available

twist-drill-din-338-n-hss-g

CHEMITOOL CUTTING 142x94mm Ø10,75 DIN338 HSS-R Roll Forged Spiral Drill

- Excellent quality/value ratio;
- Roll forged;
- Good drilling performance;
- Available from 1,0 to 16mm diameter;
-Excellent centering capability;
- Breakage resistance;
- Long tool life;
- Material: High speed steel;
- Suitable for: Steel, aluminum and non-ferrous metals;
- Compatible machine: Handheld drill machine, bench drill machine.

Available

cutting-tools

PFERD Abrasive Spiral Bands Ceramic Oxide Grain CO-COOL Cylindrical G36 60 x...

- For aggressive grinding with maximum stock removal rate on hard and tough materials which do not conduct heat well.
- Consistently high performance due to self-sharpening ceramic oxide grain.
- Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
- Abrasive: Ceramic oxide grain CO-COOL.

Available

cutting-tools

PFERD Abrasive Spiral Bands Zirconia Alumina Z Cylindrical G40 30 x 30 mm

- For coarse grinding work with a high stock removal rate and a long tool life.
- Abrasive: Zirconia alumina Z.

Available

twist-drill-din-338-n-hss-g

206010*BROCA ESPIRAL 8MM

Available

formwork-drill-chrome-vanadium

DeWalt DeWalt Formwork Drill Bit

- For very rapid and accurate drilling of clean holes in hard/softwoods and laminate.

Available

carbide-cutting-straight-shank-drill

CHEMITOOL CUTTING Ø20X160MM C2 POWER Masonry Drill

- Optimum quality/value ratio;
- Tungsten carbide head;
- 2 cutters;
- Excellent drilling performance;
- Available from diameter 3,0 to 20m;
- Long tool life;
- Head: Tungsten carbide;
- Suitable for: Concrete, brick, wood, aluminum, and natural stone;
- Compatible machine: Portable percussion drill machine.

Available

sds-max-concrete-hammer-drill-4-cutters

BROCA SDS MAX 18,0X540

Available

tube-and-sheet-drill-hss-tin-cbn

RUKO Conical Drills For Plates HSS Nº4

- Main application Steel (N / mm²) <900, steel (N / mm²) <1100, stainless steel, aluminum, brass and synthetic materials

- Secondary application Bronze and cast iron

Available

twist-drill-din-338-n-hss-g

RUKO Spiral Bits DIN 338 Tipo N, HSS-R (Ø 4,20mm)

- Main application Steel (N / mm²) <900 and cast iron

- Secondary application Brass and bronze

Available