ADAPTADOR DIAM.13

sets

RUKO Taper And Deburring Countersink Set DIN 335 Type C 90° HSS in steel...

Available

sds-plus-hammer-drill-2-cutters

BROCA SDS 6,5X110

Available

brocas-sds-plus-com-4-cortantes

CHEMITOOL CUTTING Ø5,5X110MM SDS-PLUS Hammer Drill Bit - CX4 Performance

- Excellent quality/value ratio;
- Tungsten carbide head;
- 4 cutters;
- Excellent drilling performance;
- Available from 4,0 to 26mm diameter;
- Long tool life;
- Head: 4 tungsten carbide cutters;
- Suitable for: Concrete, masonry, brick and natural stone;
- Compatible machine: Lightweight electro-pneumatic portable hammer.

Available

twist-drill-din-338-n-hss-g

IRWIN TCT Bit HSS PRO - DIN 338 Ø12x151 mm

- Rectified four-sided hard metal tip;
- Super deep double groove;
- Reduced groove;
- Vanadium chrome steel body;
- The coolant should always be used.

Available

lamela-de-nucleo-para-inox

PFERD CO-COOL Grinding Disc Ø165x30mm

- Optimal contour adaptation due to high flexibility;
- Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released;
- Front-side use very close to edges and at angles possible thanks to a special clamping system.

Available

folha-de-lixa-metal

CHEMITOOL PROMETAL FLEX 230x280mm G80 Metal Sanding Sheet

- Great quality/value ratio;
- Easy to use;
- Format 230x280mm;
- Superior flexibility;
- General use in metal;
- Tear resistant.

Available

carbide-cutting-straight-shank-drill

IRWIN Rotary Percussion Construction Bit Masonry Ø5x160 mm

- Best carbide tip design;
- Aggressive head design;
- Exclusive welding process;
- Unique groove design.

Available

lima-afiar-triangular-serra-fina

PFERD Saw File (Without Handle) 1237 100 MM H2

Triangular files, tapered to the tip with tang. Cut on three sides and three edges.

Available

cutting-tools

Cylindrical Shape (ZYA) With Top Tooth Tread TiCN (Ø10,0mm) RUKO

Available

broca-craneana-cone-morse

Crank Drills With Hard Metal Edges And Thread Cone TC, Cutting Depth 50,0 mm...

Available

disco-de-lamelas-para-metal

CHEMITOOL CUTTING Ø115x22,23 mm Z40 ALL-ROUND Zirconia Alumina Z Flap Disc

- Curved disc and radial shape;
- For geometric works;
- Fast and aggressive grinding;
- Perfect polishing at various angles;
- Great stability and job safety;
- Long tool life;
- Suitable for: Steel and Stainless Steel (INOX);
- Abrasive: Ceramic Grain;
- Suitable Machines: Straight and Angular Grinders.

Available

twist-drill-din-338-n-hss-g

TERRAX by RUKO Twist Drills DIN 338 type N, HSS Ground(Ø 10,2 mm)

- High-performance ground standard twist drill made from heavy-duty high speed steel.
- The fully ground twist drill has a precise concentricity.
- Thanks to the split point, this drill has good centring properties and requires little pressure.

Available

lamela-de-perno-para-metal

CHEMITOOL CUTTING Ø40x20x6|6×30mm A320 Alu-Oxide Shaft Mounted Flap Wheel

- Less vibration and noise;
- Flexibility;
- Excellent adaptation to contours;
- Finer finish;
- High material removal;
- Aggressive abrasive;
- Highly resistant;
- Long tool life;
- Suitable Machines: Flexible Shaft Machines, Straight Grinders;
- Abrasive: Aluminium Oxide A;
- Suitable for: Steel, Cast Steel, Cast Iron.

Available

twist-drill-din-340-n-hss-g

RUKO Spiral Bits DIN 340 TL 3000, HSSE-Co5 (Ø 13,00mm)

- Main use Steel (N / mm ²) <900, Steel (N / mm ²) <1100

- Secondary use Steel (N / mm ²) <1300, stainless steel, aluminum, brass, bronze and synthetic materials

Available

mo-ceramica-aco-dureza-50-hrc-cinza

CHEMITOOL CUTTING Ø350x38/40mm G24 Ceramic Grinding Wheel Grey

- Excellent sharpening ability.
- Fast grinding.
- Long tool life.
- White (Use on fast steel products).
- Available from size 100 to 350mm.

Available